MAX5186：Dual, 8-Bit, 40MHz, Current/Voltage, Simultaneous-Output DACs

The MAX5186 contains two 8-bit, simultaneous-update, current-output digital-to-analog converters (DACs) designed for superior performance in communications systems requiring analog signal reconstruction with low distortion and low-power operation. The MAX5189 provides equal specifications, with on-chip precision resistors for voltage output operation. The MAX5186/ MAX5189 are designed for a 10pV-s glitch operation to minimize unwanted spurious signal components at the output. An on-board 1.2V bandgap circuit provides a well-regulated, low-noise reference that can be disabled for external reference operation. The MAX5186/MAX5189 are designed to provide a high level of signal integrity for the least amount of power dissipation. Both DACs operate from a single supply voltage of 2.7V to 3.3V. Additionally, these DACs have three modes of operation: normal, low-power standby, and complete shutdown, which provides the lowest possible power dissipation with a 1µA (max) shutdown current. A fast wake-up time (0.5µs) from standby mode to full DAC operation allows power conservation by activating the DACs only when required. The MAX5186/MAX5189 are packaged in a 28-pin QSOP and are specified for the extended (-40°C to +85°C) temperature range. For higher resolution, dual 10-bit versions, refer to the MAX5180/MAX5183 data sheet.

Key Features

2.7V to 3.3V Single-Supply Operation
Wide Spurious-Free Dynamic Range: 70dB at fOUT = 2.2MHz
Fully Differential Outputs for Each DAC
±0.5% FSR Gain Mismatch at fOUT = 2.2MHz
±0.15° Phase Mismatch at fOUT = 2.2MHz
Low-Current Standby or Full Shutdown Modes
Internal 1.2V, Low-Noise Bandgap Reference
Small 28-Pin QSOP Package

MAX5186, MAX5189: Functional Diagram

Applications/Uses

Arbitrary Waveform Generation (AWG)
Digital Signal Processing (DSP)
Imaging
Signal Reconstruction of I and Q
Transmit Signals

DataSheet

title	Download file
MAX5186-MAX5189 Data Sheet	MAX5186-MAX5189.pdf

Parametrics

Part Number	Resolution (bits)	f_CLK (Msps)	Channels	SFDR (dBc)	THD (dBc)	DNL (±LSB)	INL (±LSB)	P_DISS (mW)	Interface	V_SUPPLY (V)	Package/Pins	Budgetary Price
Part Number	Resolution (bits)	f_CLK (Msps)	Channels	@ f_OUT	@ f_OUT	DNL (±LSB)	INL (±LSB)	P_DISS (mW)	Interface	V_SUPPLY (V)	Package/Pins	See Notes
MAX5186	8	40	2	70 @ 2.2MHz	-68 @ 2.2MHz	0.25	0.25	20.7	Parallel	3	QSOP/28	$3.64 @1k
MAX5189	8	40	2	70 @ 2.2MHz	-68 @ 2.2MHz	0.25	0.25	20.7	Parallel	3	QSOP/28	$3.64 @1k

Design kits & evaluation modules

MAX5183EVKIT

Quality and Environmental Data

MAX5186.pdf

Ordering Information

Part Number	Status	Recommended Replacement	Package	Temp	RoHS
MAX5186BEEI	No Longer Available	MAX5186BEEI+	QSOP,;28 pin;61.9 mm²	-40°C to +85°C	No
MAX5186BEEI+	Active		QSOP,;28 pin;61.9 mm²	-40°C to +85°C	Lead Free
MAX5186BEEI+T	Active		QSOP,;28 pin;61.9 mm²	-40°C to +85°C	Lead Free
MAX5186BEEI-T	No Longer Available	MAX5186BEEI+T	QSOP;28 pin	-40°C to +85°C	See data sheet

MAX5186-MAX5189.pdf MAX5189

MAX5186.pdf MAX5186

MAX5186-MAX5189.pdf MAX5189