• 简体中文
• English

MAX5236：Single-Supply 3V/5V, Voltage-Output, Dual, Precision 10-Bit DACs

Industry's Smallest and Most Accurate Dual 10-Bit DACs

The MAX5236/MAX5237 precision, dual, voltage-output, 10-bit digital-to-analog converters (DACs) consume only 360µA from a single 5V (MAX5237) or 325µA from a single 3V (MAX5236) supply. These devices feature output buffers that swing rail-to-rail. The internal gain amplifiers (1.6384V/V) maximize the dynamic range of the DAC output. The MAX5236/MAX5237 feature 13.5MHz a 3-wire serial interface compatible with SPI™/QSPI™/and MICROWIRE™. Each DAC input is organized as an input register followed by a DAC register. A 16-bit shift register loads data into the input registers. Input registers update the DAC registers independently or simultaneously. In addition, programmable control bits allow power-down with 1kΩ or 200kΩ internal loads. The MAX5236/MAX5237 are fully specified over the extended industrial temperature range (-40°C to +85°C) and are available in space-saving 10-pin µMAX® packages.

Key Features Guaranteed 1/2LSB INL (max) Low Supply Current 325µA (Normal Operation) 0.4µA (Full Power-Down Mode) Single-Supply Operation 3V (MAX5236) 5V (MAX5237) Space-Saving 10-Pin µMAX Package Output Buffers Swing Rail-to-Rail Power-On Reset Clears Registers and DACs to Zero Programmable Shutdown Modes with 1kΩ or 200kΩ Internal Loads Resets to Zero 13.5MHz SPI/QSPI/MICROWIRE-Compatible, 3-Wire Serial Interface Buffered Output Drives 5kΩ || 100pF

MAX5236, MAX5237: Functional Block Diagram Applications/Uses µP-Controlled Systems Automated Test Equipment (ATE) Digital Gain and Offset Control Industrial Process Controls Motion Control

DataSheet

Parametrics

Ordering Information