• 简体中文
• English

MAX5381：Low-Cost, Low-Power, 8-Bit DACs with 2-Wire Serial Interface in SOT23

Lowest-Cost, Smallest DAC with On-Chip Reference

The MAX5380/MAX5381/MAX5382 are low-cost, 8-bit digital-to-analog converters (DACs) in miniature 5-pin SOT23 packages, with a simple 2-wire serial interface that allows communication with multiple devices. The MAX5380 has an internal +2V reference and operates from a +2.7V to +3.6V supply. The MAX5381 has an internal +4V reference and operates from a +4.5V to +5.5V supply. The MAX5382 operates over the full +2.7V to +5.5V supply range and has an internal reference equal to 0.9 x VDD. The fast-mode I²C*-compatible serial interface allows communication at data rates up to 400kbps, minimizing board space and reducing interconnect complexity in many applications. Each device is available with one of four factory-preset addresses (see Selector Guide). These DACs also include an output buffer, a low-power shutdown mode, and a power-on reset that ensures the DAC outputs are at zero when power is initially applied. In shutdown mode, supply current is reduced to less than 1µA and the output is pulled down to GND with a 10kΩ resistor.

Key Features 8-Bit Accuracy in a Miniature 5-Pin SOT23 Wide +2.7V to +5.5V Supply Range (MAX5382) Low 230µA max Supply Current 1µA Shutdown Mode Buffered Output Drives Resistive Loads Low-Glitch Power-On Reset to Zero DAC Output Fast I²C-Compatible Serial Interface <±5% Full-Scale Error (MAX5382) <±1LSB max INL/DNL

MAX5380, MAX5381, MAX5382: Typical Operating Circuit Applications/Uses Automatic Gain Control Automatic Offset Adjustment Automatic Tuning (VCO) Power-Amp Bias Control Programmable Threshold Levels

DataSheet

Parametrics

Design kits & evaluation modules

• MAX9611PMB1

Related Products

• MAX5385：Low-Cost, Low-Power, 8-Bit DACs with 3-Wire Serial Interface in SOT23
• MAX5384：Low-Cost, Low-Power, 8-Bit DACs with 3-Wire Serial Interface in SOT23

Ordering Information