• 简体中文
• English

MAX539：+5V, Low-Power, Voltage-Output, Serial 12-Bit DACs

5V or +/-5V Supplies; See MAX5352 for Improved Single-Supply Operation

The MAX531/MAX538/MAX539 are low-power, voltage- output, 12-bit digital-to-analog converters (DACs) specified for single +5V power-supply operation. The MAX531 can also be operated with ±5V supplies. The MAX538/MAX539 draw only 140µA, and the MAX531 (with internal reference) draws only 260µA. The MAX538/MAX539 come in 8-pin DIP and SO packages, while the MAX531 comes in 14-pin DIP and SO packages. All parts have been trimmed for offset voltage, gain, and linearity, so no further adjustment is necessary. The MAX538's buffer is fixed at a gain of +1 and the MAX539's buffer at a gain of +2. The MAX531's internal op amp may be configured for a gain of +1 or +2, as well as for unipolar or bipolar output voltages. The MAX531 can also be used as a four-quadrant multiplier without external resistors or op amps. For parallel data inputs, see the MAX530 data sheet.

Key Features Operate from Single +5V Supply Buffered Voltage Output Internal 2.048V Reference (MAX531) 140µA Supply Current (MAX538/MAX539) INL = ±1/2LSB (max) Guaranteed Monotonic over Temperature Flexible Output Ranges: 0V to VDD (MAX531/MAX539) VSS to VDD (MAX531) 0V to 2.6V (MAX531/MAX538) 8-Pin SO/DIP (MAX538/MAX539) Power-On Reset Serial Data Output for Daisy-Chaining

MAX531, MAX538, MAX539: Functional Block Diagram Applications/Uses Battery-Operated/Remote Industrial Controls Battery-Powered Test Instruments Digital Gain and Offset Control General Purpose Machine- and Motion-Control Devices

DataSheet

Parametrics

Quality and Environmental Data

• MAX539.pdf

Related Products

• MAX5353：Low-Power, 12-Bit Voltage-Output DACs with Serial Interface
• MAX5352：Low-Power, 12-Bit Voltage-Output DACs with Serial Interface

Ordering Information