MAX5917:+65V Simple Swapper Hot-Swap Switches

The MAX5910/MAX5917 are fully integrated hot-swap switches for positive supply rails. These devices allow the safe insertion and removal of circuit cards into live backplanes or ports without causing glitches on the backplane power-supply rail. They also monitor various circuit parameters and disconnect the load if a fault condition occurs, alerting the host with a logic-level active-low IFAULT output. The MAX5910/MAX5917 operate over a +10V to +65V input voltage range. They are designed to permit hot plugging of an internet appliance such as an IP phone but are not limited to that application. During startup, an internal power FET regulates the current between the backplane power source and the load to 280mA for the MAX5910, 567mA for the MAX5917A, and 420mA for the MAX5917B. After startup, the FET is fully enhanced to reduce its on-resistance. To ensure robust operation, the MAX5910/MAX5917 contain built-in safety features that prevent damage to the internal FET. They include an enable input, which responds to positive logic signals (+3.3V or +5V), allowing the host system to disconnect the load. The MAX5910/MAX5917 Simple Swapper™ hot-swap ICs monitor four parameters for fault conditions: undervoltage lockout (UVLO), power-not-good, zero-current detection, and thermal shutdown. These devices are available in the extended temperature range, -40°C to +85°C. The MAX5910 comes in an 8-pin SO package and the MAX5917A/B is available in a 16-pin SO package.

Key Features
  • Provides Safe Hot Swap for +10V to +65V Power Supplies
  • IEEE 802.3AF Compliant (MAX5917A)
  • Startup into 500µF Load (MAX5917A)
  • 280mA Current Limit for MAX5910
  • 567mA Current Limit for MAX5917A
  • 420mA Current Limit for MAX5917B
  • Zero-Current Load Detection
  • Integrated 2.2Ω Power FET
  • Status Output Reports Fault Conditions
  • Internal Switch-Protection Circuitry
  • Built-In Thermal Shutdown
MAX5910, MAX5917: Typical Operating Circuit
MAX5910, MAX5917: Typical Operating Circuit
Applications/Uses
  • Internet Appliances
  • IP Phones
  • Network Hubs, Switches, Routers
  • Network Hubs, Switches, Routers
  • Power-Over-LAN
  • Power-Over-MDI
  • Remote Power Distribution
DataSheet
titleDownload file
MAX5910-MAX5917 Data SheetMAX5910-MAX5917.pdf
Parametrics
Part NumberVIN
(V)
VIN
(V)
Circuit Breaker/ Current LimitFault Condition ControlChannelsPositive/Negative RailFeaturesPackage/PinsBudgetary
Price
minmaxSee Notes
MAX59101065Current LimitLatched Off1PositiveIntegrated MOSFET
Undervoltage/Overvoltage Protection
SOIC(N)/8$3.96 @1k
MAX5917SOIC(N)/16
Quality and Environmental Data
Ordering Information
Part NumberStatusRecommended ReplacementPackageTempRoHS
MAX5917AESENo Longer AvailableMAX5917AESE+SOIC(N),;16 pin;62 mm²-40°C to +85°CNo
MAX5917AESE+ActiveSOIC(N),;16 pin;62 mm²-40°C to +85°CLead Free
MAX5917AESE+TActiveSOIC(N),;16 pin;62 mm²-40°C to +85°CLead Free
MAX5917AESE-TNo Longer AvailableMAX5917AESE+TN.SO;16 pin-40°C to +85°CSee data sheet
MAX5917BESENo Longer AvailableMAX5917BESE+SOIC(N),;16 pin;62 mm²-40°C to +85°CNo
MAX5917BESE+ActiveSOIC(N),;16 pin;62 mm²-40°C to +85°CLead Free
MAX5917BESE+TActiveSOIC(N),;16 pin;62 mm²-40°C to +85°CLead Free
MAX5917BESE-TNo Longer AvailableMAX5917BESE+TN.SO;16 pin-40°C to +85°CSee data sheet
MAX5910-MAX5917.pdf MAX5917
MAX5917.pdf MAX5917
MAX5910-MAX5917.pdf MAX5917