• 简体中文
• English

MAX6628：Remote ±1°C Accurate Digital Temperature Sensors with SPI-Compatible Serial Interface

First Remote SPI-Compatible Temperature Sensors in SOT Packages ±1°C Accurate with 12-Bit +0.0625°C Resolution

The MAX6627/MAX6628 precise digital temperature sensors report the temperature of a remote sensor. The remote sensor is a diode-connected transistor, typically a low-cost, easily mounted 2N3904 NPN type that replaces conventional thermistors or thermocouples. The MAX6627/MAX6628 can also measure the die temperature of other ICs, such as microprocessors (µPs) or microcontrollers (µCs) that contain an on-chip, diode-connected transistor. Remote accuracy is ±1°C when the temperature of the remote diode is between 0°C and +125°C and the temperature of the MAX6627/MAX6628 is +30°C. The temperature is converted to a 12-bit + sign word with 0.0625°C resolution. The architecture of the device is capable of interpreting data as high as +145°C from the remote sensor. The MAX6627/MAX6628 temperature should never exceed +125°C. These sensors are 3-wire serial interface SPI™ compatible, allowing the MAX6627/MAX6628 to be readily connected to a variety of µCs. The MAX6627/MAX6628 are read-only devices, simplifying their use in systems where only temperature data is required. Two conversion rates are available, one that continuously converts data every 0.5s (MAX6627), and one that converts data every 8s (MAX6628). The slower version provides minimal power consumption under all operating conditions (30µA, typ). Either device can be read at any time and provide the data from the last conversion. Both devices operate with supply voltages between +3.0V and +5.5V, are specified between -55°C and +125°C, and come in space-saving 8-pin SOT23 and lead-free TDFN packages.

Key Features Accuracy ±1°C (max) from 0°C ≤ TRJ ≤ +125°C, TA = +30°C ±2.4°C (max) from -55°C ≤ TRJ ≤ +100°C, 0°C ≤ TA ≤ +70°C 12-Bit + Sign, 0.0625°C Resolution Low Power Consumption 30µA (typ) (MAX6628) 200µA (typ) (MAX6627) Operating Temperature Range (-55°C to +125°C) Measurement Temperature Range, Remote Junction (-55°C to +145°C) 0.5s (MAX6627) or 8s (MAX6628) Conversion Rate SPI-Compatible Interface +3.0V to +5.5V Supply Range 8-Pin SOT23 and TDFN Packages Lead-Free Version Available (TDFN Package)

MAX6627, MAX6628: Functional Diagram Applications/Uses Hard Disk Drive Industrial Control Systems Notebooks, PCs Smart Battery Packs/Chargers

DataSheet

Parametrics

Quality and Environmental Data

• MAX6628.pdf

Related Products

• MAX6630：12-Bit + Sign Digital Temperature Sensors with Serial Interface
• MAX6631：12-Bit + Sign Digital Temperature Sensors with Serial Interface
• MAX6629：12-Bit + Sign Digital Temperature Sensors with Serial Interface
• MAX6632：12-Bit + Sign Digital Temperature Sensors with Serial Interface

Ordering Information