• 简体中文
• English

MAX7359：2-Wire Interfaced Low-EMI Key Switch Controller/GPO

Low-Voltage, Low-EMI, and Low-Supply Current Key-Switch Controller Monitors Up to 64 Keys Without External Components

The MAX7359 I²C interfaced peripheral provides microprocessors with management of up to 64 key switches. Key codes are generated for each press and release of a key for easier implementation of multiple key entries. Key inputs are monitored statically, not dynamically, to ensure low-EMI operation. The switches can be metallic or resistive (carbon) with up to 5kΩ of resistance. The MAX7359 features autosleep and autowake to further minimize the power consumption of the device. The autosleep feature puts the device in a low-power state (1µA typ) after a sleep timeout period. The autowake feature configures the MAX7359 to return to normal operating mode from sleep upon a key press. The key controller debounces and maintains a FIFO of key-press and release events (including autorepeat, if enabled). An interrupt (active-low INT) output can be configured to alert key presses either as they occur, or at maximum rate. Any of the column drivers (COL2/PORT2–COL7/PORT7) or the active-low INT, if not used, can function as a general-purpose output (GPO). The MAX7359 is offered in small, 24-pin TQFN (3.5mm x 3.5mm) and 25-bump WLP (2.31mm x 2.31mm) packages for cell phones, pocket PCs, and other portable consumer electronic applications. The MAX7359 operates over the -40°C to +85°C temperature range.

Key Features Optional Key Release Detection on All Keys Monitor Up to 64 Keys +1.62V to +3.6V Operation Autosleep and Autowake to Minimize Current Consumption Under 1µA Sleep Current FIFO Queues Up to 16 Debounced Key Events Key Debounce Time User Configurable from 9ms to 40ms Low-EMI Design Uses Static Matrix Monitoring Hardware Interrupt at the FIFO Level or at the End of Definable Time Period Up to Seven Open-Drain Logic Outputs Available Capable of Driving LEDs 400kbps, 5.5V-Tolerant, 2-Wire Serial Interface Selectable 2-Wire, Serial-Bus Timeout Four I²C Address Choices Small, 24-Pin TQFN Package (3.5mm x 3.5mm) , or 25-Pin WLP Package (2.31mm x 2.31mm)

MAX7359: Typical Application Circuit Applications/Uses Cell Phones Handheld Games PDAs Portable Consumer Electronics

DataSheet

Parametrics

Design kits & evaluation modules

• MAX7359EVKIT

Quality and Environmental Data

• MAX7359.pdf

Ordering Information