• 简体中文
• English

MAX861：50mA, Frequency-Selectable, Switched-Capacitor Voltage Converters

Inductorless Inverter/Positive Doubler Switches Up to 250kHz

The MAX860/MAX861 charge-pump voltage converters invert input voltages ranging from +1.5V to +5.5V, or double input voltages ranging from +2.5V to +5.5V. Because of their high switching frequencies, these devices use only two small, low-cost capacitors. Their 50mA output makes switching regulators unnecessary, eliminating inductors and their associated cost, size, and EMI. Greater than 90% efficiency over most of the load-current range, combined with a typical operating current of only 200µA (MAX860), provides ideal performance for both battery-powered and board-level voltage-conversion applications. A frequency-control (FC) pin provides three switching-frequencies to optimize capacitor size and quiescent current and to prevent interference with sensitive circuitry. Each device has a unique set of three available frequencies. A shutdown (active-low SHDN) pin reduces current consumption to less than 1µA. The MAX860/MAX861 are suitable for use in applications where the ICL7660 and MAX660's switching frequencies are too low. The MAX860/MAX861 are available in 8-pin µMAX® and SO packages.

Key Features 8-Pin, 1.11mm High µMAX Package Invert or Double the Input Supply Voltage Three Selectable Switching Frequencies High Frequency Reduces Capacitor Size 87% Efficiency at 50mA 200µA Quiescent Current (MAX860) 1µA Shutdown Supply Current 600mV Voltage Drop at 50mA Load 12Ω Output Resistance

MAX860, MAX861: Typical Operating Circuit Applications/Uses Handheld Instruments (PDAs, Palmtops) Interface Power Supplies Medical Instruments Operational Amplifier Power Supplies Portable Computing

DataSheet

Parametrics

Related Products

• MAX1680：125mA, Frequency-Selectable, Switched-Capacitor Voltage Converters

Ordering Information