• 简体中文
• English

MAX864：Dual-Output Charge Pump with Shutdown

Generates Bipolar Outputs

The MAX864 CMOS, charge-pump, DC-DC voltage converter produces a positive and a negative output from a single positive input, and requires only four capacitors. The charge pump first doubles the input voltage, then inverts the doubled voltage. The input voltage ranges from +1.75V to +6.0V. The internal oscillator can be pin-programmed from 7kHz to 185kHz, allowing the quiescent current, capacitor size, and switching frequency to be optimized. The 55Ω output impedance permits useful output currents up to 20mA. The MAX864 also has a 1µA logic-controlled shutdown. The MAX864 comes in a 16-pin QSOP package that uses the same board area as a standard 8-pin SOIC. For more space-sensitive applications, the MAX865 is available in an 8-pin µMAX® package, which uses half the board area of the MAX864.

Key Features Requires Only Four Capacitors Dual Outputs (Positive and Negative) Low Input Voltages: +1.75V to +6.0V 1µA Logic-Controlled Shutdown Selectable Frequencies Allow Optimization of Capacitor Size and Supply Current

MAX864: Typical Operating Circuit Applications/Uses Data Acquisition LCD Panels Low-Cost Split Supply for Low-Voltage Low-Voltage GaAsFET Bias in Wireless Handsets Split Supply for Analog Circuitry Split Supply from 2 to 4 Ni Cells or 1 Li+ Cell VCO and GaAsFET Supplies

DataSheet

Parametrics

Quality and Environmental Data

• MAX864.pdf

Related Products

• MAX865：Compact, Dual-Output Charge Pump

Ordering Information