• 简体中文
• English

MAX869L：2A, Current-Limited, High-Side P-Channel Switch with Thermal Shutdown

Low-Resistance P-Channel Switches with Adjustable, Accurate Current Limit Protects Systems and USB

The MAX869L P-channel load switch features an accurate user-set current limit and low on-resistance. This switch is designed to protect your power source from shorts and surges by limiting current and preventing the system supply from being pulled low. The input voltage range is 2.7V to 5.5V. The MAX869L features a 2A, 45mΩ switch controlled by a logic signal. Current-limit accuracy is ±21%, and can be set from 400mA to 2.4A using a single resistor. The device has a low 12µA quiescent supply current, which reduces to 2µA max in shutdown. It features thermal-shutdown protection and a logic-signal output pin (active-low FAULT) that signals when there is an overcurrent or overtemperature condition.

Key Features Very Small Footprint (16-pin QSOP is the same size as an 8-pin SO) Low Resistance: 45mΩ at 3V ±21%-Accurate, User-Set Current Limit 12µA (typ) Quiescent Current 0.01µA (typ) Shutdown Current 0.04µA (typ) Leakage to Output when Switch is Off 2.7V to 5.5V Input Range Thermal Shutdown Active-Low FAULT Output

MAX869L: Typical Operating Circuit Applications/Uses Handheld Instruments (PDAs, Palmtops) Notebook Computers Palmtop Computers Personal Communicators Portable Medical Instrumentation Universal Serial Bus (USB)

DataSheet

Parametrics

Quality and Environmental Data

• MAX869L.pdf

Related Products

• MAX891L：Current-Limited, High-Side P-Channel Switches with Thermal Shutdown
• MAX894L：Dual, Current-Limited, High-Side P-Channel Switches with Thermal Shutdown
• MAX890L：1.2A, Current-Limited, High-Side P-Channel Switch with Thermal Shutdown

Ordering Information