• 简体中文
• English

MAX8821：White LED Charge Pump with Mono Class D Audio Amp and Dual LDO

Industry's First LED Charge Pump with Integrated Audio Amplifier and 2 LDOs Providing Space Savings and Highest Efficiency

The MAX8821 integrates a charge pump for white LEDs, an audio loudspeaker amplifier, and two low-noise LDOs controlled by an I²C control interface. The high-efficiency, adaptive-mode inverting charge pump drives up to six LEDs with constant current for uniform brightness. The LED current is controlled by an I²C interface and adjusts from 0.1mA to 25.6mA per LED into 32 pseudo-logarithmic steps. Independent voltages for each LED maximize efficiency even with large LED forward voltage (VF) mismatch. An internal temperature derating function reduces the current above +40°C to protect the LEDs. The high-efficiency mono Class D audio amplifier delivers up to 2W into a 4Ω speaker from a 5V input supply. The amplifier features proprietary filterless Active Emissions Limiting (AEL) technology. AEL prevents high-frequency emissions resulting from conventional Class D free-wheeling behavior in the presence of an inductive load. The amplifier offers two modulation schemes: a fixed-frequency mode (FFM) and a spread-spectrum mode (SSM) that reduce EMI-radiated emissions due to the modulation frequency. The amplifier also has robust output protection and high power-supply rejection ratio (PSRR). Click-and-pop suppression is active during power-up/down, enable/disable, and for all mode changes. The amplifier's gain is adjustable through an I²C interface, from -3dB to +24dB in 10 3dB steps. Differential inputs improve common-mode noise rejection. The LDOs in the MAX8821 are designed for low-noise operation. Each LDO output voltage can be individually programmed by the I²C interface. Both LDO1 and LDO2 have a high 70dB PSRR rating. The MAX8821 includes soft-start, thermal shutdown, open-circuit, and short-circuit protections, and is available in a compact 28-pin, Thin QFN, 4mm x 4mm package (0.8mm max height).

Key Features White LED Inverting Charge Pump Independent Adaptive Current Regulators for Each LED 6 Low-Dropout Current Regulators Flexible I²C Dimming Control for Each LED Ramp-Up/Down, Current Control for Each LED Low 70µA (typ) Quiescent Current TA Derating Function Protects LEDs Mono 2W Class D Loudspeaker Amplifier 85% Efficiency (RL = 8Ω, POUT = 600mW) Low 0.05% THD+N at 1kHz High 65dB PSRR at 1kHz Fully Differential Inputs -3dB to +24dB Gain Settings in 3dB Steps Integrated Click-and-Pop Suppression Low Quiescent Current Dual Low-Noise LDO 45µVRMS Output Noise, 70dB PSRR Flexible I²C-Controlled Output Voltages 200mA and 300mA Output Current Drive

MAX8821: Typical Operating Circuit Applications/Uses Cell Phones and Smartphones MP3 Players, GPS Devices PDAs, Digital Cameras, Camcorders

DataSheet

Parametrics

Design kits & evaluation modules

• MAX8821EVKIT

Related Products

• MAX8595：High-Efficiency, 36V Step-Up Converters with TA Derating Option for 2 to 9 White LEDs
• MAX8596：High-Efficiency, 36V Step-Up Converters with TA Derating Option for 2 to 9 White LEDs
• MAX1578：Complete Bias and White LED Power Supplies for Small TFT Displays
• MAX1576：480mA White LED 1x/1.5x/2x Charge Pump for Backlighting and Camera Flash
• MAX1574：180mA, 1x/2x, White LED Charge Pump in 3mm x 3mm TDFN
• MAX1575：White LED 1x/1.5x Charge Pump for Main and Sub-Displays
• MAX1573：White LED 1x/1.5x Charge Pump in UCSP and Thin QFN
• MAX1582：High-Efficiency Step-Up Converters for White LED Main and Subdisplay Backlighting
• MAX1561：High-Efficiency, 26V Step-Up Converters for Two to Six White LEDs
• MAX1599：High-Efficiency, 26V Step-Up Converters for Two to Six White LEDs
• MAX1848：White LED Step-Up Converter in SOT23

Ordering Information