• 简体中文
• English

MAX924：Ultra Low-Power, Single/Dual-Supply Comparators

The MAX921–MAX924 single, dual, and quad micropower, low-voltage comparators feature the lowest power consumption available. These comparators draw less than 4µA supply current over temperature (MAX921/MAX922), and include an internal 1.182V ±1% voltage reference, programmable hysteresis, and TTL/CMOS outputs that sink and source current. Ideal for 3V or 5V single-supply applications, the MAX921–MAX924 operate from a single +2.5V to +11V supply (or a ±1.25V to ±5V dual supply), and each comparator's input voltage range swings from the negative supply rail to within 1.3V of the positive supply. The MAX921–MAX924's unique output stage continuously sources as much as 40mA. And by eliminating power-supply glitches that commonly occur when comparators change logic states, the MAX921–MAX924 minimize parasitic feedback, which makes them easier to use. The single MAX921 and dual MAX923 provide a unique and simple method for adding hysteresis without feedback and complicated equations, simply by using the HYST pin and two resistors.

Key Features µMAX® Package—Smallest 8-Pin SO (MAX921/MAX922/MAX923) Ultra-Low 4µA Max Quiescent Current Over Extended Temp. Range (MAX921) Power Supplies: Single +2.5V to +11V Dual ±1.25V to ±5.5V Input Voltage Range Includes Negative Supply Internal 1.182V ±1% Bandgap Reference Adjustable Hysteresis TTL/CMOS-Compatible Outputs 12µs Propagation Delay (10mV Overdrive) No Switching Crowbar Current 40mA Continuous Source Current

MAX921, MAX922, MAX923, MAX924: Typical Operating Circuit Applications/Uses Battery-Powered Applications Oscillator Circuits Threshold Detectors Window Comparators

DataSheet

Parametrics

Quality and Environmental Data

• MAX924.pdf

Ordering Information