• 简体中文
• English

MAX9242：21-Bit Deserializers with Programmable Spread Spectrum and DC Balance

Fully Integrated Deserializer with Spread Spectrum for EMI Reduction in Digital Video Applications

The MAX9242/MAX9244/MAX9246/MAX9254 deserialize three LVDS serial-data inputs into 21 single-ended LVCMOS/LVTTL outputs. A separate parallel-rate LVDS clock provides the timing for deserialization. The MAX9242/MAX9244/MAX9246/MAX9254 feature spread-spectrum capability, allowing the output data and clock frequency to spread over a specified range to reduce EMI. The single-ended data and clock outputs are programmable for a frequency spread of ±2%, ±4%, or no spread. The spread-spectrum function is also available when the MAX9242/MAX9244/MAX9246/MAX9254 operate in non-DC-balanced mode. The modulation rate of the spread is 32kHz for a 33MHz LVDS clock input and scales linearly with frequency. The single-ended outputs have a separate supply, allowing +1.8V to +5V output logic levels. The MAX9254 features high output drive current for both data and clock outputs for faster transition times in the presence of heavy capacitive loads. The MAX9242/MAX9244/MAX9246/MAX9254 feature programmable DC balance, allowing isolation between a serializer and deserializer using AC-coupling. The MAX9242/MAX9244/MAX9246/MAX9254 operate with the MAX9209/MAX9213 serializers and are available with a rising-edge strobe (MAX9242) or falling-edge strobe (MAX9244/MAX9246/MAX9254). The LVDS inputs meet ISO 10605 ESD specifications with ±30kV Air-Gap Discharge and ±6kV Contact Discharge ratings.

Key Features Programmable ±4%, ±2%, or OFF Spread-Spectrum Output for Reduced EMI Programmable DC-Balanced or Non-DC-Balanced Modes DC Balance Allows AC-Coupling for Wider Input Common-Mode Voltage Range Spread Spectrum Operates in DC-Balanced or Non-DC-Balanced Mode High Output Drive (MAX9254) π/4 Deskew by Oversampling (MAX9242/MAX9244/MAX9254) 16MHz-to-34MHz (DC-Balanced) and 20MHz-to-40MHz (Non-DC-Balanced) Operation (MAX9242/MAX9244/MAX9254) 6MHz-to-18MHz (DC-Balanced) and 8MHz-to-20MHz (Non-DC-Balanced) Operation (MAX9246) Rising-Edge (MAX9242) or Falling-Edge (MAX9244/MAX9246/MAX9254) Output Strobe High-Impedance Outputs when Active-Low PWRDWN is Low Allow Output Busing Separate Output Supply Allows Interface to +1.8V, +2.5V, +3.3V, and +5V Logic LVDS Inputs Meet ISO 10605 ESD Protection at ±30kV Air-Gap Discharge and ±6kV Contact Discharge LVDS Inputs Meet IEC 61000-4-2 Level 4 ESD Protection at ±15kV Air-Gap Discharge and ±8kV Contact Discharge LVDS Inputs Conform to ANSI TIA/EIA-644 Standard +3.3V Main Power Supply

MAX9242, MAX9244, MAX9246, MAX9254: Functional Diagram Applications/Uses Automotive DVD Entertainment Systems Automotive Navigation Systems Digital Copiers Laser Printers

DataSheet

Parametrics

Design kits & evaluation modules

• MAX9209EVKIT
• MAX9244EVKIT

Quality and Environmental Data

• MAX9242.pdf

Related Products

• MAX9238：Hot-Swappable, 21-Bit, DC-Balanced LVDS Deserializers
• MAX9236：Hot-Swappable, 21-Bit, DC-Balanced LVDS Deserializers
• MAX9234：Hot-Swappable, 21-Bit, DC-Balanced LVDS Deserializers
• MAX9209：Programmable DC-Balanced 21-Bit Serializers
• MAX9213：Programmable DC-Balanced 21-Bit Serializers
• MAX9214：Programmable DC-Balance 21-Bit Deserializers

Ordering Information