• 简体中文
• English

MAX9288：3.12Gbps GMSL Deserializers for Coax or STP Input and MIPI CSI-2 Output

Deserializers Enable Use of Coax Cables, Reducing Weight and Cost of Cabling in Automotive Infotainment

The MAX9288/MAX9290 gigabit multimedia serial link (GMSL) deserializers receive data from a GMSL serializer over 50Ω coax or 100Ω shielded twisted-pair (STP) cable and output deserialized data on the CSI-2 outputs. The MAX9290 has HDCP content protection but otherwise is the same as the MAX9288. The deserializers pair with any GMSL serializer capable of coax output. When programmed for STP input, they are backward compatible with any GMSL serializer. The audio channel supports L-PCM I2S stereo and up to eight channels of L-PCM in TDM mode. Sample rates of 32kHz to 192kHz are supported with sample depth up to 32 bits. The embedded control channel operates at 9.6kbps to 1Mbps in UART-to-UART and UART-to-I2C modes, and up to 1Mbps in I2C-to-I2C mode. Using the control channel, a µC can program serializer, deserializer, and peripheral device registers at any time, independent of video timing, and manage HDCP operation (MAX9290). Two GPIO ports are included, allowing display power-up and switching of the backlight, among other uses. A continuously sampled GPI input supports touch-screen controller interrupt requests in display applications. For use with longer cables, the deserializers have a programmable cable equalizer. The serial input meets ISO 10605 and IEC 61000-4-2 ESD standards. The GMSL supply is 3.0V to 3.6V, the MIPI CSI-2 supply is 1.7V to 1.9V, and the I/O supply is 1.7V to 3.6V. The devices are available in lead(Pb)-free, 48-pin, 7mm x 7mm TQFN and QFND packages with exposed pad and 0.5mm lead pitch.

Key Features Ideal for High-Definition Video Applications 4-Lane CSI-2 Output with Up to 1Gbps Per Lane Works with Low-Cost 50Ω Coax Cable and FAKRA Connectors or 100Ω STP 104MHz High-Bandwidth Mode Supports 1920 x 720p/60Hz Display with 24-Bit Color Equalization Allows 15m Cable at Full Speed Up to 192kHz Sample Rate and 32-Bit Sample Depth For 7.1 Channel HD Audio Audio Clock from Audio Source or Audio Sink Color Lookup Table for Gamma Correction CNTL0–CNTL3 Control Outputs for HDMI/MHL Multiple Data Rates for System Flexibility Up to 3.12Gbps Serial-Bit Rate 6.25MHz to 104MHz Pixel Clock 9.6kbps to 1Mbps Control Channel in UART, Mixed UART/I²C, or I2C Mode with Clock-Stretch Capability Reduces EMI and Shielding Requirements Tracks Spread Spectrum on Input High-Immunity Mode for Maximum Control- Channel Noise Rejection Peripheral Features for System Power-Up and Verification Built-In PRBS Tester for BER Testing of the Serial Link Programmable Choice of 8 Default Device Addresses Two Dedicated GPIO Ports Dedicated “Up/Down” GPI for Touch-Screen Interrupt and Other Uses Remote/Local Wake-Up from Sleep Mode Meets Rigorous Automotive and Industrial Requirements -40°C to +105°C Operating Temperature ±8kV Contact and ±12kV Air ISO 10605 and IEC 61000-4-2 ESD Protection

MAX9288, MAX9290: Functional Diagram Applications/Uses High-Resolution Automotive Navigation Megapixel Camera Systems Rear-Seat Infotainment

DataSheet

Parametrics

Design kits & evaluation modules

• MAXCOAX2STP-HSD

Related Products

• MAX9277：3.12Gbps GMSL Serializers for Coax or STP Output Drive and LVDS Input
• MAX9281：3.12Gbps GMSL Serializers for Coax or STP Output Drive and LVDS Input
• MAX9279：3.12Gbps GMSL Serializers for Coax or STP Output Drive and Parallel Input
• MAX9275：3.12Gbps GMSL Serializers for Coax or STP Output Drive and Parallel Input

Ordering Information