MAX96706：14-Bit GMSL Deserializer with Coax or STP Cable Input

Compact 1.6Gbps Deserializer with Eye-Width Monitor and CRC Protection of Video and Control Data for ADAS Applications

The MAX96706 is a compact deserializer especially suited for automotive camera applications. Features include adaptive equalization and an output crosspoint switch. An embedded control channel operates at 9.6kbps to 1Mbps in UART, I2C, and mixed UART/ I2C modes, allowing programming of serializer, deserializer (SerDes), and camera registers, independent of video timing. The deserializer can track data from a spread-spectrum serial input. The serial input meets ISO 10605 and IEC 61000-4-2 ESD standards. The core supply range is 1.7V to 1.9V and the I/O supply range is 1.7V to 3.6V. The device is available in a 32-pin (5mm × 5mm) TQFN package with 0.5mm lead pitch and operates over -40°C to +115°C temperature range.

Key Features

Ideal for Safety Camera Applications
- Works with Low-Cost 50Ω Coax (100Ω STP) Cable
- Error Detection of Video/Control Data
- High-Immunity Mode for Robust Control-Channel EMC Tolerance
- Retransmission of Control Data Upon Error
- Best-in-Class Supply Current: 190mA (max)
- Adaptive Equalization for 15m Cable at Full Speed
- 32-Pin (5mm × 5mm) TQFN Package
- Horizontal- and Vertical-Sync Encoding and Tracking
High-Speed Deserialization for Megapixel Cameras
- Up to 1.74Gbps Serial-Bit Rate
- 6.25MHz to 87MHz × 12-Bit + H/V Data
- 36.66MHz to 116MHz × 12-Bit + H/V Data (through Internal Encoding)
Multiple Modes for System Flexibility
- 9.6kbps to 1Mbps Control Channel in UART, I2C (with Clock Stretch), or UART-to-I2C Modes
- 2:1 Input Mux for Camera Selection
- 15 Hardware-Selectable I2C-Device Addresses
- Pairs with Any Maxim GMSL Serializer
- Crosspoint Switch Maps Data to any Output
Reduces EMI and Shielding Requirements
- Spread-Spectrum Serial-Input Tracking and Transfer to the Parallel Output
- 1.7V to 1.9V Core and 1.7V to 3.6V I/O Supply
Peripheral Features for System Verification
- Built-In PRBS Receiver for BER Testing
- Eye-Width Monitor Allows In-System Test of High-Speed Serial Link
- Dedicated “Up/Down” GPI for Camera Frame Sync Trigger and Other Uses
Meets AEC-Q100 Automotive Specification
- -40°C to +115°C Operating Temperature Range
- ±8kV Contact and ±15kV Air IEC 61000-4-2 and ISO 10605 ESD Protection

MAX96706: Functional Diagram

Applications/Uses

Automotive Camera Applications

DataSheet

title	Download file
MAX96706 Data Sheet	MAX96706.pdf

Parametrics

Part Number	Signal Type	Signal Type	Functions	Rx	Tx	Data Rates (Mbps)	V_SUPPLY (V)	Package/Pins
Part Number	Rx	Tx	Functions	Rx	Tx	Data Rates (Mbps)	V_SUPPLY (V)	Package/Pins
MAX96706	CML	CMOS LVCMOS	Deserializer	1	14	1500	1.8 3.3	THIN QFN/32 TQFN/32

Design kits & evaluation modules

Ordering Information

Part Number	Status	Package	Temp	RoHS
MAX96706GTJ+	Active	THIN QFN,;32 pin;TQFN;	-40°C to +105°C	Lead Free
MAX96706GTJ+T	Active	THIN QFN,;32 pin;TQFN;	-40°C to +105°C	Lead Free
MAX96706GTJ/V+	Active	THIN QFN,;32 pin;TQFN;	-40°C to +105°C	Lead Free
MAX96706GTJ/V+T	Active	THIN QFN,;32 pin;TQFN;	-40°C to +105°C	Lead Free

MAX96706.pdf MAX96706