MAX96711：14-Bit GMSL Serializer with High Immunity/Bandwidth Mode and Coax/STP Cable Drive

Compact 1.6Gbps Serializer with Line-Fault Detection and CRC Protection of Video and Control Data for ADAS Applications

The MAX96711 is a compact serializer with features especially suited for automotive camera applications. In high-bandwidth mode, the parallel-clock maximum is 116MHz for 12-bit linear or combined HDR data types. Line-fault circuitry detects open/short faults on the link cable. The embedded control channel operates at 9.6kbps to 1Mbps in UART, I2C, and mixed UART/I2C modes, allowing programming of serializer, deserializer, and camera registers independent of video timing. Line-fault circuitry detects open/short faults on the link cable. For driving longer cables, the IC has programmable pre/deemphasis. Programmable spread spectrum is available on the serial output. The serial output meets ISO 10605 and IEC 61000-4-2 ESD standards. The core supply range is 1.7V to 1.9V, and the I/O supply range is 1.7V to 3.6V. The MAX96711 is available in a 32-pin (5mm × 5mm) TQFN package with 0.5mm lead pitch, and operates over the -40°C to +115°C temperature range.

Key Features

Ideal for Safety Camera Applications
- Works with Low-Cost 50Ω Coax (100Ω STP) Cables
- Error Detection of Video/Control Data
- High-Immunity Mode for Robust Control-Channel EMC Tolerance
- Retransmission of Control Data Upon Error Detection
- Best-in-Class Supply Current: 93mA (max)
- Pre/Deemphasis Allows 15m Cable at Full Speed
- 32-Pin (5mm × 5mm) TQFN Package with 0.5mm Lead Pitch
High-Speed Data Serialization for Megapixel Cameras
- Up to 1.74Gbps Serial-Bit Rate
- 12.5MHz to 87MHz × 12-Bit + H/V Data
- 36.66MHz to 116MHz × 12-Bit + H/V Data (through Internal Encoding)
Multiple Modes for System Flexibility
- 9.6kbps to 1Mbps Control Channel in UART, I2C (with Clock Stretch), or UART-to-I2C Modes
- Crosspoint Switch Accepts Any Input Bitmap
- Modes for Encoded VSYNC and HSYNC
Reduces EMI and Shielding Requirements
- Programmable Output Spread Spectrum
- Tracks Spread Spectrum Applied at the Parallel Input
- 1.7V to 3.6V I/O Supply
Peripheral Features for Camera Power-Up and Verification
- Line Fault Detects Shorts to Ground/Battery and Open
- Built-In PRBS Generator for BER Testing
- Dedicated GPO for Camera Frame-Sync Trigger and Other Uses
- Remote/Local Wake-Up from Sleep Mode
Meets AEC-Q100 Automotive Specification
- -40°C to +115°C Operating Temperature
- ±8kV Contact and ±15kV Air IEC 61000-4-2 and ISO 10605 ESD Protection

MAX96711: Functional Block Diagram

Applications/Uses

Automotive Camera Applications

DataSheet

title	Download file
MAX96711 Data Sheet	MAX96711.pdf

Parametrics

Part Number	Signal Type	Signal Type	Functions	Rx	Tx	Data Rates (Mbps)	V_SUPPLY (V)	Package/Pins
Part Number	Rx	Tx	Functions	Rx	Tx	Data Rates (Mbps)	V_SUPPLY (V)	Package/Pins
MAX96711	CMOS LVCMOS	CML	Serializer	14	1	1500	1.8 3.3	THIN QFN/32 TQFN/32

Design kits & evaluation modules

Ordering Information

Part Number	Status	Package	Temp	RoHS
MAX96711GTJ+	Active	THIN QFN,;32 pin;TQFN;	-40°C to +105°C	Lead Free
MAX96711GTJ+T	Active	THIN QFN,;32 pin;TQFN;	-40°C to +105°C	Lead Free
MAX96711GTJ/V+	Active	THIN QFN,;32 pin;TQFN;	-40°C to +105°C	Lead Free
MAX96711GTJ/V+T	Active	THIN QFN,;32 pin;TQFN;	-40°C to +105°C	Lead Free

MAX96711.pdf MAX96711