• 简体中文
• English

MAX9768：10W Mono Class D Speaker Amplifier with Volume Control

High-Efficiency, Low BOM-Cost Class D Amplifier

The MAX9768 mono 10W Class D speaker amplifier provides high-quality, efficient audio power with an integrated volume control function. The MAX9768 features a 64-step dual-mode (analog or digitally programmable) volume control and mute function. The audio amplifier operates from a 4.5V to 14V single supply and can deliver up to 10W into an 8Ω speaker with a 14V supply. A selectable spread-spectrum mode reduces EMI-radiated emissions, allowing the device to pass EMC testing with ferrite bead filters and cable lengths up to 1m. The MAX9768 can be synchronized to an external clock, allowing synchronization of multiple Class D amplifiers. The MAX9768 features high 77dB PSRR, low 0.08% THD+N, and SNR up to 97dB. Robust short-circuit and thermal-overload protection prevent device damage during a fault condition. The MAX9768 is available in a 24-pin thin QFN-EP (4mm x 4mm x 0.8mm) package and is specified over the extended -40°C to +85°C temperature range.

Key Features 10W Output (8Ω, PVDD = 14V, THD+N = 10%) Spread-Spectrum Modulation Meets EN55022B EMC with Ferrite Bead Filters Amplifier Operation from 4.5V to 14V Supply 64-Step Integrated Volume Control (I²C or Analog) Low 0.08% THD+N (RL = 8Ω, POUT = 6W) High 77dB PSRR Two tON Times Offered MAX9768—220ms MAX9768B—15ms Low-Power Shutdown Mode (0.5µA) Short-Circuit and Thermal-Overload Protection

MAX9768: Typical Operating Circuit Applications/Uses Flat-Panel Displays GPS Navigation Systems Multimedia Monitors Notebook Computers Security/Personal Mobile Radio

DataSheet

Parametrics

Design kits & evaluation modules

• MAX9768EVCMAXQU
• MAX9768EVKIT

Quality and Environmental Data

• MAX9768.pdf

Ordering Information