• 简体中文
• English

MX7575：CMOS, µP Compatible, 5µs/10µs, 8-Bit ADCs

Maxim's MX7575/MX7576 are high-speed (5µs/10µs), microprocessor (µP) compatible, 8-bit analog-to-digital converters (ADCs). The MX7575 provides an on-chip track/hold function that allows full-scale signals up to 50kHz (386mV/µs slew rate) to be acquired and digitized accurately. Both ADCs use a successive-approximation technique to achieve their fast conversions and low power dissipation. The MX7575/MX7576 operate with a +5V supply and a 1.23V external reference. They accept input voltages ranging from 0V to 2VREF. The MX7575/MX7576 are easily interfaced to all popular 8-bit µPs through standard CS and RD control signals. These signals control conversion start and data access. A BUSY signal indicates the beginning and end of a conversion. Since all the data outputs are latched and three-state buffered, the MX7575/MX7576 can be directly tied to a µP data bus or system l/O port. Maxim also makes the MAX165, a plug-in replacement for the MX7575 with an internal 1.23V reference. For applications that require a differential analog input and an internal reference, the MAX166 is recommended.

Key Features Fast Conversion Time: 5µs (MX7575) 10µs (MX7576) Built-In Track/Hold Function (MX7575) Low Total Unadjusted Error (±1LSB max) 50kHz Full-Power Signal Bandwidth (MX7575) Single +5V Supply Operation 8-Bit µP Interface 100ns Data-Access Time Low Power: 15mW Small-Footprint Packages

MX7575, MX7576: Pin Configuration Applications/Uses Audio Systems Digital Signal Processing (DSP) High-Speed Data Acquisition High-Speed Servo Loops Low-Power Data Loggers Telecommunications

DataSheet

Parametrics

Related Products

• MAX165：5µs, 8-Bit ADC with Track/Hold and Reference
• MAX166：5µs, 8-Bit ADC with Track/Hold and Reference
• MAX152：3V, 8-Bit ADC with 1µA Power Down
• ADC0820：CMOS High-Speed 8-Bit A/D Converter with Track/Hold Function
• MAX160：CMOS, µP Compatible, 4µs, 8-Bit ADC

Ordering Information