PHY2210：Equalizing Receiver with Adjustable Preemphasis Driver

Highly Integrated Transceiver Enables the Smallest BOM SFP+ Cable Assemblies

The PHY2210 is a complete integrated transceiver designed for use in active copper cable assemblies. The device incorporates an easily adjustable preemphasis driver on the transmit side, and the receiver is optimized to equalize for copper cables at data rates of up to 10.5Gbps. Initialization and control of the device can be provided by using a small EEPROM, allowing low-cost cable assemblies to be realized. Low power consumption and the use of a 5mm x 5mm QFN package allow the development of a SFP+ compliant active cable assembly. The device extends 10G transmission distances across twin-axial copper cable up to 15 meters.

Key Features

Multirate Support 1Gbps to 10.5Gbps
Supports 1x, 2x, 4x, 8x FC, 10G Ethernet, 10G Fibre Channel
Very Low Power Dissipation IC (500mW)
Integrated Limiting Amplifier with Programmable CML Output Swing
Loss-of-Signal (LOS) and Transmit Disable Functions
Single 3.3V Supply Operating Over -40°C to +85°C
Supports SFF 8472
15m Reach Over 24AWG Twin-Axial Copper Cable at 10G, 20m at 6.25G

Applications/Uses

Ethernet 1G, 10G
Fibre Channel 1G, 2G, 4G, 8G
SFP+ Active Copper Cables

Parametrics

Part Number	Applications	Data Rate (Mbps)	Data Rate (Mbps)	Max. Reach @ Max. Data Rate	V_SUPPLY (V)	I/O Type	Channels	Package/Pins	Oper. Temp. (°C)
Part Number	Applications	min	max	Max. Reach @ Max. Data Rate	V_SUPPLY (V)	I/O Type	Channels	Package/Pins	Oper. Temp. (°C)
PHY2210	10BgE Copper Backplanes Copper Cable Interconnect Ethernet SFP+ Modules Fibre Channel	1000	10500	15m Cable	3.3	CML	1 Tx, 1 Rx	See Data Sheet	-40 to +95