MIC2215
The MIC2215 is a high performance, triple LDO voltage regulator, with each regulator capable of providing 250mA continuous output current.
Ideal for battery operated applications, the MIC2215 offers 1% initial accuracy, extremely low dropout voltage (100mV @ 150mA), and low ground current at light load (typically 110µA per regulator). Equipped with a noise bypass pin and featuring very high power supply ripple rejection (PSRR) of up to 80dB, the MIC2215 provides the lowest noise and highest efficiency solution for RF applications in portable electronics such as cellular phones and wireless LAN applications.
Equipped with TTL logic-compatible enable pins, each of the regulators in the MIC2215 can be put into a zero-current off-mode where the supply current is much less than 1µA when all the regulators are disabled. The MIC2215 is a µCap design, which enables a stable output with small ceramic output capacitors, reducing both cost and required board space for output bypassing.
The MIC2215 is available in the miniature 16-pin, 4mm x 4mm MLF® package.
Features- Input voltage range:+2.25V to +5.5V
- 70dB PSRR
- Stable with ceramic output capacitor
- High output accuracy:
- ±1.0% initial accuracy
- ±2.0% over temperature
- Low dropout voltage of 100mV @ 150mA
- Low quiescent current:110µA per regulator
- Fast turn-on time: 30µs
- Zero off-mode current
- Thermal shutdown protection
- Current-limit protection
- Tiny 16-pin (4mm x 4mm) MLF® package
| Parameter|
Parameter Name
Value
| Value | |
Product Type
Multi-Channel LDOs
|
Multi-Channel LDOs
| |
# of Out
3
|
3
| |
IOUT #1
250
|
250
| |
IOUT #2
250
|
250
| |
IOUT #3
250
|
250
| |
IOUT #4
|
| |
VIN Min (V)
2.25
|
2.25
| |
VIN Max (V)
5.5
|
5.5
| |
VOUT (V)
Please Contact Sales Office
|
Please Contact Sales Office
| |
Voltage Drop Typ (mV)
100
|
100
| |
Tol Typ %
±1
|
±1
| |
Noise (µV) rms
30
|
30
| |
PSRR 1 kHz (dB)
70
|
70
| |
Soft Start Pin
|
| |
Load Dump
|
| |
Rev Bat
|
| |
Reverse Current Protect
|
|
|
Documents
Ordering Information
| Part Number | Leads | Package Type | Temp Range | Packing | 1+ | 26+ | 100+ | 1000+ | 5000+ |
|---|
| MIC2215-AAAYML-TR | 16 | VQFN | -40C to +125C | T/R | 1.74 | 1.45 | 1.32 | 1.27 | 1.26 |
RoHS Information
| PartNumber | DeviceWeight | ShippingWeight | LeadCount | PackageType | PackageWidth | SolderComposition | JEDECIndicator | RoHS | ChinaEFUP |
|---|
| MIC2215-PMMYML-TR | | 0.820200 | 16 | VQFN | 4x4x0.9mm | NiPdAu | e4 |  |  |
| MIC2215-PPPYML-TR | | 0.820200 | 16 | VQFN | 4x4x0.9mm | NiPdAu | e4 | | |
| MIC2215-MMGYML-TR | | 0.820200 | 16 | VQFN | 4x4x0.9mm | NiPdAu | e4 | | |
| MIC2215-PPGYML-TR | | 0.820200 | 16 | VQFN | 4x4x0.9mm | NiPdAu | e4 | | |
| MIC2215-AAAYML-TR | | 0.820200 | 16 | VQFN | 4x4x0.9mm | NiPdAu | e4 | | |
| MIC2215-PPMYML-TR | | 0.820200 | 16 | VQFN | 4x4x0.9mm | NiPdAu | e4 | | |
| MIC2215-MMMYML-TR | | 0.820200 | 16 | VQFN | 4x4x0.9mm | NiPdAu | e4 | | |
