MIC5374

The MIC5374/84 is a four output device with three 200mA LDOs and a Real Time Clock (RTC) 1mA LDO which is ideal for application processor support in mobile platforms. The MIC5374 provides independent control active high enables for each of the 200mA LDOs with an additional always-on RTC LDO. The MIC5384 provides active low enables. Both the MIC5374 and MIC5384 are available in the tiny 2.5mm x 2.5mm Thin MLF® package.

The MIC5374/84 is designed for high input ripple rejection (high PSRR) and provides low output noise making it ideal for powering sensitive RF circuitry such as GPS, WiFi, and Bluetooth applications. The MIC5374/84 also incorporates a power-on reset (POR) supervisor with adjustable delay time set by an external capacitor, and an independent input pin to monitor any voltage level. Once high the POR output can be asserted low again by enabling the manual reset (MR) pin. When the MR pin is restored low the POR output will re-time the delay set by the external delay capacitor.

The MIC5374/84 operates with very small ceramic output capacitors to reduce board space and component cost. It is available in various fixed output voltages. The MIC5374/84 has a junction temperature range from -40°C to +125°C.

Features
  • 1.7V to 5.5V input supply voltage range
  • Output current: 200mA LDO1/2/3, 1mA LDO4
  • LDO4: Ultra low 8 µA I BIAS for RTC support
  • High output accuracy (±2%)
  • Independent enable pins
  • 2.5mm x 2.5mm Thin MLF® 16-pin package
  • Thermal shutdown and current limit protection
  • POR with user-defined voltage monitoring
  • POR voltage input
  • Adjustable delay time
  • Manual reset pin
  • Low dropout voltage: 170mV at 150mA
  • High PSRR: 55dB at 1kHz on each LDO
  • Stable with tiny ceramic output capacitors
Parameter
Parameter Name Value Value
Product Type Multi-Channel LDOs Multi-Channel LDOs
# of Out 4 4
IOUT #1 200 200
IOUT #2 200 200
IOUT #3 200 200
IOUT #4 1 1
VIN Min (V) 1.7 1.7
VIN Max (V) 5.5 5.5
VOUT (V) 3.3/2.5/1.8/1.0 3.3/2.5/1.8/1.0
Voltage Drop Typ (mV) 170 170
Tol Typ % ±2 ±2
Noise (µV) rms 200 200
PSRR 1 kHz (dB) 55 55
Soft Start Pin
Load Dump
Rev Bat
Reverse Current Protect
Documents
MIC5374 - Triple 200mA µCap LDO and 1mA RTC LDO in 2.5mm x 2.5mm Thin MLFâData Sheets11/05/20151059KB
MIC5374/84 Evaluation BoardUser Guides11/11/2015304KB
RoHS Information
PartNumberDeviceWeightShippingWeightLeadCountPackageTypePackageWidthSolderCompositionJEDECIndicatorRoHSChinaEFUP
MIC5374-MG44YMT-TR0.07660016UQFN2.5x2.5x0.6mmNiPdAue4
MIC5374-SJG1YMT-TR0.07660016UQFN2.5x2.5x0.6mmNiPdAue4
MIC5374 - Triple 200mA µCap LDO and 1mA RTC LDO in 2.5mm x 2.5mm Thin MLFâ MIC5384
MIC5374/84 Evaluation Board MIC5384