Features- nanoWatt XLP technology
- Deep sleep current is 60 nA typical
- WDT : 650 nA @ 2V typical
- RTCC: 650 nA @ 32 Khz, 2V typical
- Vbat allows lowest power consumption on back up battery
- Multiple, Switchable Clock Modes for Optimum Performance and Power Management
- USB 2.0 full speed compliant with on chip transceiver
- 480 segments of LCD display.
- 60 X 8 commons
- Drives LCD panel in Sleep mode
- Internal charge pump for LCD
- 64Mhz and upto 16 MIPS performance
- Four 16 bit timers/counters
- Seven Capture/Compare/PWM (CCP)
- Three Enhanced Capture/Compare/PWM (ECCP)
- Two Master Synchronous Serial Port (MSSP) feature SPI and I2C
- Four UART with IrDA
- 10/12 bit ADC with 24 channel resolution
- Three Rail-to-Rail Enhanced Analog Comparators
- Charge Time Measurement Unit (CTMU) for touch and measurements
- Operating voltage 2.0V – 3.6V
| Parameter|
Parameter Name
Value
| Value | |
Program Memory Type
Flash
|
Flash
| |
Program Memory (KB)
32
|
32
| |
CPU Speed (MIPS)
16
|
16
| |
RAM Bytes
3,862
|
3,862
| |
Digital Communication Peripherals
4-UART, 4-A/E/USART, 2-SPI, 2-I2C2-MSSP(SPI/I2C)
|
4-UART, 4-A/E/USART, 2-SPI, 2-I2C2-MSSP(SPI/I2C)
| |
Capture/Compare/PWM Peripherals
7 CCP, 3 ECCP
|
7 CCP, 3 ECCP
| |
Timers
4 x 16-bit
|
4 x 16-bit
| |
ADC
24 ch, 12-bit
|
24 ch, 12-bit
| |
Comparators
3
|
3
| |
USB (ch, speed, compliance)
1, FS Device, USB 2.0
|
1, FS Device, USB 2.0
| |
Segment LCD (pixels)
480
|
480
| |
Temperature Range (C)
-40 to 85
|
-40 to 85
| |
Operating Voltage Range (V)
2 to 3.6
|
2 to 3.6
| |
Pin Count
100
|
100
| |
XLP
Yes
|
Yes
| |
Cap Touch Channels
24
|
24
|
|
