Features

• Up to 16 MIPS performance
• 16 x 16 Hardware Multiply, Single Cycle Execution
• 12-bit x 16-bit Hardware Divider
• C Compiler Optimized Instruction Set
• Run, Idle and Sleep modes
• Multiple, Switchable Clock Modes for Optimum Performance and Power Management
• Run mode: 1 mA/MIPS, 2.0V Typical
• Sleep mode Current Down to 100 nA Typical
• Standby Current with 32 kHz Oscillator:2.5 uA,2.0V typical
• Self-Reprogrammable under Software Control
• 10,000 erase/write cycles
• 20 year data retention
• EEprom emulation capable
• Internal oscillator support - 31 kHz to 8 MHz, up to 32 MHz with 4X PLL
• On-chip LDO Voltage Regulator
• JTAG Boundary Scan and Flash Memory Program Support
• Fail-Safe Clock Monitor – allows safe shutdown if clock fails
• Watchdog Timer with separate RC oscillator
• 10-bit ADC, 16 channels, 500k samples per second
• Three Analog comparators
• USB v2.0 On-the-Go compliant
• Dual role capable, can act as either Host or Device
• Low speed(1.5Mb/s) and full speed(12 Mb/s) operation in host mode
• Full speed USB operaton in Device mode
• Supports 32 endpoints
• On-chip USB transceiver
• CTMU supports Capacitive Touch applications
• Perpheral Pin Select allows I/O remapping of many peripherals in real time
• 4xUART Modules with LIN and IrDA support, 4 Deep FIFO
• 3xSPI ™ Modules with 8 Deep FIFO
• 3xI2C™ Modules with Master and Slave Modes
• Five 16-bit Timer Modules
• Up to 9 Input Capture and 5 Output Compare/PWM with dedicated time base
• Hardware RTCC, Real-Time Clock Calendar with Alarms
• PMP, Parallel Master Port, with 16 Address Lines, and 8/16-bit Data

Parameter