Features

• 100 MHz/131 DMIPS, MIPS32® M4K® core
• USB 2.0-compliant Full-speed OTG controller
• Two I2S/SPI modules for Codec and serial communications
• Peripheral Pin Select (PPS) functionality
• Parallel Master Port (PMP) for graphics interfaces
• Charge Time Measurement Unit (CTMU)
• Temperature Range - 40°C to 105°C
• Operating voltage range of 2.3V to 3.6V
• 128KB Flash memory (plus an additional 12 KB of Boot Flash)
• 32KB SRAM memory
• MIPS16e® mode for up to 40% smaller code size
• Pin-compatible with most Microchip 16-bit devices
• Low-power management modes (Idle and Sleep)
• Peripheral Pin Select (PPS) functionality
• Up to 4 channels of hardware DMA with automatic data size detection
• Five UARTs and two I2C™ modules
• Hardware Real-Time Clock and Calendar (RTCC)
• Five 16-bit Timers/Counters (two 16-bit pairs combine to create two 32-bit timers)
• Five Capture inputs and Five Compare/PWM outputs
• External graphics interface with up to 34 PMP pins
• Audio data communication: I2S, LJ, RJ, USB
• Audio data control interface: SPI and I2C™
• Audio data master clock: Generation of fractional clock frequencies Can be synchronized with USB clock Can be tuned in run-time
• Generation of fractional clock frequencies
• Can be synchronized with USB clock
• Can be tuned in run-time
• Charge Time Measurement Unit (CTMU): Supports mTouch™ capacitive touch sensing Provides high-resolution time measurement (1 ns) On-chip temperature measurement capability
• Supports mTouch™ capacitive touch sensing
• Provides high-resolution time measurement (1 ns)
• On-chip temperature measurement capability
• ADC Module: 10-bit 1Msps rate with one Sample and Hold (S&H) Up to 28 analog inputs Can operate during sleep mode
• 10-bit 1Msps rate with one Sample and Hold (S&H)
• Up to 28 analog inputs
• Can operate during sleep mode
• Comparators: Two dual-input Comparator modules Programmable references with 32 voltage points
• Two dual-input Comparator modules
• Programmable references with 32 voltage points
• In-circuit and in-application programming
• 4-wire MIPS® Enhanced JTAG interface
• Unlimited program and six complex data breakpoints
• IEEE 1149.2-compatible (JTAG) boundary scan

Parameter