UCS1002-1
The UCS1002-1 provides a USB port power switch for precise control of up to 2.5 amperes continuous current with over-current limit (OCL), dynamic thermal management, latch or auto-recovery (low test current) fault handling, selectable active low or high enable, under- and over-voltage lockout, back-drive protection, and back-voltage
protection.
Split supply support for VS and VDD is an option for low power in system standby states. This gives battery operated applications, like automotive charging ports, the ability to detect attachments from a sleep or off state. After the Attach Detect is flagged, the system can decide to wake up and/or provide charging.
In addition to power switching and current limiting modes, the UCS1002-1 will automatically charge a wide variety of portable devices, including USB-IF BC1.2, YD/T-1591 (2009), most Apple® and RIM®, and many others. Nine preloaded charger emulation profiles maximize compatibility coverage of peripheral devices. As well, a customizable charger emulation profile is available to accommodate unique existing and future portable device handshaking/signature requirements.
The UCS1002-1 also provides current monitoring to allow intelligent management of system power and charge rationing for controlled delivery of current regardless of the host power state. This is especially important for battery operated applications that want to provide power in a standby and/or off state but do not want to drain the battery
excessively.
The UCS1002-1 is available in a 20-pin QFN 4 mm x 4 mm package.
Features- Port power switch with two current limit behaviors
2.9 V to 5.5 V source voltage range
Up to 2.5 A current with 55 mΩ On Resistance
Over-current trip or constant current limiting
Soft turn-on circuitry
Programmable current limit
Dynamic thermal management
Under- and over-voltage lockout
Back-drive, back-voltage protection
Latch or auto-recovery (low test current) fault handling
Selectable active high or low power switch enable
BC1.2 VBUS discharge port renegotiation function
- 2.9 V to 5.5 V source voltage range
- Up to 2.5 A current with 55 mΩ On Resistance
- Over-current trip or constant current limiting
- Soft turn-on circuitry
- Programmable current limit
- Dynamic thermal management
- Under- and over-voltage lockout
- Back-drive, back-voltage protection
- Latch or auto-recovery (low test current) fault handling
- Selectable active high or low power switch enable
- BC1.2 VBUS discharge port renegotiation function
- Selectable/automatic cycling of USB data line charger emulation profiles
USB-IF BC1.2 charging downstream port (CDP) and dedicated charging port (DCP) modes, YD/T-1591, and most Apple® and RIM® protocols standard; others as defined via the SMBus 2.0/I2C®
USB 2.0 compliant high-speed data switch (in Passthrough and CDP modes)
Nine preloaded charger emulation profiles for maximum compatibility coverage of peripheral devices
One custom programmable charger profile for portable device support for fully host controlled charger emulation
- USB-IF BC1.2 charging downstream port (CDP) and dedicated charging port (DCP) modes, YD/T-1591, and most Apple® and RIM® protocols standard; others as defined via the SMBus 2.0/I2C®
- USB 2.0 compliant high-speed data switch (in Passthrough and CDP modes)
- Nine preloaded charger emulation profiles for maximum compatibility coverage of peripheral devices
- One custom programmable charger profile for portable device support for fully host controlled charger emulation
- Self-contained current monitoring and charge rationing for power allocation applications
- Automatic shutdown when Battery Full option
- Low power Attach Detection and open-drain A_DET# pin
- Ultra low power Sleep state
- Optional split supply support for VBUS and VDD for low power in system standby states
- Wake on Attach USB
- SMBus 2.0/I2C communications
Supports Block Write and Read
Multiple SMBus addresses
- Supports Block Write and Read
- Multiple SMBus addresses
- Wide operating temperature range: -40°C to +85°C
- IEC61000-4-2 8 / 15 kV ESD immunity
- Notebook and Netbook Computers
- Tablets and E-book Readers
- Desktops and Monitors
- Docking Stations and Printers
- AC-DC wall adapters
| Parameter|
Parameter Name
Value
| Value | |
Description
Programmable USB Port Power Controller with Charger Emulation
|
Programmable USB Port Power Controller with Charger Emulation
| |
Hi-Speed USB 2.0 Switch
1
|
1
| |
USB Port Power Switch
1
|
1
| |
Battery Charger Emulation Profiles
10
|
10
| |
8 Resistor Set Current Limits
Up to 2.5A
|
Up to 2.5A
| |
Power Allocation
yes
|
yes
| |
Attach Detection Output
yes
|
yes
| |
Interface
I2C /SMBus
|
I2C /SMBus
| |
Current Measurement
yes
|
yes
|
|
Documents
Ordering Information
| Part Number | Leads | Package Type | Temp Range | Packing | 1+ | 26+ | 100+ | 1000+ | 5000+ |
|---|
| UCS1002-1-BP-TR | 20 | QFN | -40C to +85C | T/R | 1.79 | 1.49 | 1.35 | 1.31 | 1.29 |
相关开发工具
Similar Devices
RoHS Information
| PartNumber | DeviceWeight | ShippingWeight | LeadCount | PackageType | PackageWidth | SolderComposition | JEDECIndicator | RoHS | ChinaEFUP |
|---|
| UCS1002-1-BP | 0.043100 | 0.632653 | 20 | QFN | 4x4x0.9mm | Matte Tin | e3 |  |  |
| UCS1002-1-BP-TR | 0.043100 | 0.212121 | 20 | QFN | 4x4x0.9mm | Matte Tin | e3 | | |
