USB2640
Microchip's USB264x/2660 family combines an ultra-fast interface between a USB host and today's most popular Flash media cards with a versatile, cost-effective and power-efficient 2-port Hi-Speed USB 2.0 hub controller. USB264x/2660 is designed for applications that demand low power, small footprint and reduced BOM without compromising performance or features.
Offering a high level of USB 2.0 compliance and interoperability, the USB264x/2660 family allows system designers the flexibility of independent access to a wide selection of Flash media readers and also provides additional downstream USB access ports.
Each device in the USB264x/2660 family consists of USB 2.0 device transceivers with 2-port hub functionality, a fast 8051 microprocessor and Memory Stick® (MS), xD-Picture Card™* (xD) and Secure Digital (SD) controllers in a single, fully-integrated chip. The USB2660 has an additional SD/SDIO port. This family of devices offers USB expansion ports as well as a Flash card media reader/writer capable of ultra high-performance operation. Average sustained transfer rates exceeding 35MB/s are possible if the media and host can support those rates.**
*Microchip makes the following part-numbered device available for purchase only by customers who are xD-Picture Card licensees: USB2640, USB2660. By purchasing or ordering any of such devices, Buyer represents, warrants, and agrees that Buyer is a duly licensed Licensee under an xD-Picture CardTM License Agreement with Fuji Photo Film Co., Ltd., Olympus Optical Co., Ltd., and Toshiba Corporation; and that Buyer will maintain in effect such xD-Picture Card license and will give Microchip reasonable advance notice of any termination or expiration of such xD-Picture Card license, but in no event less than five days advance notice. Microchip may discontinue making such devices available for purchase by Buyer and/or discontinue further deliveries of such devices if such xD-Picture Card license shall expire, terminate, or cease to be in force, or if Buyer is or becomes in default of such xD-Picture Card license.
**Results are based on actual measurements on evaluation platforms developed by Microchip, and are meant only as a general guideline, not as a guarantee. Actual customer results may vary based on a number of factors, including board layout and measurement technique.
Features- Ultra-fast Flash media reader/writer with two exposed downstream ports for external peripheral expansion
- Optimizes footprint with an approximate 40% board space reduction compared to prior Microchip discrete devices
- Reduces power consumption by approximately 30% versus alternative Microchip discrete solutions
- Supports MultiMediaCard™ (MMC)/SD, MS/MS-Pro™/MS-Pro-HG and xD cards, among others
- USB2660 supports additional MMD/SD Card or SDIO port
- Internal code configurable using an external I2C™ EEPROM; support for external code using an SPI Flash EEPROM
- Configurable software architecture supports customization for customer-specific applications and field upgradeable firmware
- Ability to place the device away from the main board to deliver USB connectivity where it is needed within the system
- 7x7mm,48-pin QFN package (USB264x family) and 9x9mm, 64-pin QFN package (USB2660); both and RoHS-compliant
- Industrial temperature range (-40° to +85°C) options available
- Printers
- Desktop and Mobile PCs
- Consumer Audio/Visual (A/V)
- Digital TVs
- Monitors
- Media Players/Viewers
- Gaming Consoles
- Digital Photo Frames
- Set-top Boxes
| Parameter
Parameter Name
Value
| Value |
Description
USB 2.0 Flash Media Controller with Hi-Speed USB Hub
|
USB 2.0 Flash Media Controller with Hi-Speed USB Hub
|
Upstream Port
USB 2.0
|
USB 2.0
|
USB Speed
Hi Speed
|
Hi Speed
|
Downstream Ports
SD, MMC, SDIO, MS, xD
|
SD, MMC, SDIO, MS, xD
|
MCU Interface
USB
|
USB
|
Tx Buffer Size (bytes)
3K
|
3K
|
Rx Buffer Size (bytes)
3K
|
3K
|
GPIOs
4
|
4
|
Op Voltage (V)
3.3
|
3.3
|
ROM I/F
I2C
|
I2C
|
Secure Digital/ MM cards
1
|
1
|
SD/MMC/ SDIO Ports
1
|
1
|
Memory Stick
Yes
|
Yes
|
xD Picture Card
Yes
|
Yes
|
Logical Unit Num (LUN)
1
|
1
|
Temp Range Min (°C)
-40
|
-40
|
Temp Range Max (°C)
85
|
85
|
|
Documents
Ordering Information
Part Number | Leads | Package Type | Temp Range | Packing | 1+ | 26+ | 100+ | 1000+ | 5000+ |
---|
USB2640-HZH-02 | 48 | VQFN | 0C to +70C | TRAY | 3.18 | 2.65 | 2.41 | 2.33 | 2.30 |
USB2640I-HZH-02 | 48 | VQFN | -40C to +85C | TRAY | 3.99 | 3.33 | 3.02 | 2.92 | 2.89 |
USB2640I-HZH-02-TR | 48 | VQFN | -40C to +85C | T/R | 3.99 | 3.33 | 3.02 | 2.92 | 2.89 |
相关开发工具
Similar Devices
Product | USB Speed | Downstream Ports | Op. Voltage (V) | GPIOs | Price5K |
---|
MCP2200 | Full Speed | UART | 3.0 to 5.5 | 8 | $1.40 |
MCP2210 | Full Speed | SPI | 3.3 to 5.5 | 9 | $1.40 |
MCP2221 | Full Speed | I2C/SMBus, UART | 3.0 to 5.5 | 4 | $1.55 |
MCP2221A | Full Speed | I2C/SMBus, UART | 3.0 to 5.5 | 4 | $1.37 |
USB2227 | Hi Speed | CF, SD, MMC, SDIO, MS, xD | 3.3 | 15 | $1.75 |
USB2228 | Hi Speed | CF, SD, MMC, SDIO, MS, xD | 3.3 | 15 | $1.75 |
USB2229 | Hi Speed | CF, SD, MMC, SDIO, MS, xD | 3.3 | 12 | $3.17 |
USB2230 | Hi Speed | CF, SD, MMC, SDIO, MS, xD | 3.3 | 12 | $3.17 |
USB2240 | Hi Speed | SD, MMC, MS, xD | 3.3 | 4 | $1.43 |
USB2241 | Hi Speed | SD, MMC, MS | 3.3 | 5 | $1.43 |
USB2244 | Hi Speed | SD, MMC | 3.3 | 7 | $1.36 |
USB2250 | Hi Speed | CF, SD, MMC, MS, xD | 3.3 | 32 | $1.71 |
USB2251 | Hi Speed | CF, SD, MMC, MS | 3.3 | 32 | $1.71 |
USB2601 | Hi Speed | CF, SD, MMC, SDIO, MS | 1.8, 3.3 | 14 | |
USB2602 | Hi Speed | CF, SD, MMC, SDIO, MS, xD | 1.8, 3.3 | 14 | |
USB2640 | Hi Speed | SD, MMC, SDIO, MS, xD | 3.3 | 4 | $2.30 |
USB2641 | Hi Speed | SD, MMC, SDIO, MS | 3.3 | 6 | $2.30 |
USB2642 | Hi Speed | SD, MMC, eMMC | 3.3 | 1 | $2.75 |
USB2660 | Hi Speed | SD, MMC, SDIO, MS | 3.3 | 6 | $2.69 |
USB4640 | Hi Speed | SD, MMC, SDIO, MS | 3.3 | 4 | $2.30 |
RoHS Information
PartNumber | DeviceWeight | ShippingWeight | LeadCount | PackageType | PackageWidth | SolderComposition | JEDECIndicator | RoHS | ChinaEFUP |
---|
USB2640-HZH-02 | 0.129500 | 1.269231 | 48 | VQFN | 7x7x0.9mm | Matte Tin | e3 | | |
USB2640I-HZH-02-TR | 0.129500 | 0.528000 | 48 | VQFN | 7x7x0.9mm | Matte Tin | e3 | | |
USB2640I-HZH-02 | 0.129500 | 1.269231 | 48 | VQFN | 7x7x0.9mm | Matte Tin | e3 | | |