Features

• Up to 40 MIPS Operation (at 3.0-3.6V)
• 16 x 16 Fractional/Integer Hardware Multiply, Single Cycle Execution
• Single-Cycle Multiply and Accumulate
• 32-bit by 16-bit Hardware Divider
• C Compiler Optimized Instruction Set
• Internal oscillator and Phase-Locked Loop (PLL) with 120 MHz VCO
• On-chip LDO Voltage Regulator
• JTAG Boundary Scan and Flash Memory Program Support
• Fail-Safe Clock Monitor – allows safe shutdown if clock fails
• Watchdog Timer with separate RC oscillator
• Three pairs of PWM outputs
• Dead Time for Rising and Falling Edges
• Duty Cycle Resolution of 1.04 ns for Dead-Time, Phase Shift, and Frequency
• Supported PWM modes: Standard Edge-Aligned, True Independent Output, Complementary, Center-Aligned, Push-Pull, Multi-Phase, Variable Phase, Fixed Off-Time, Current Reset, and Current-Limit
• PWMxL, PWMxH Output Pin Swapping
• PWM4H, PWM4L Pins Remappable
• On-the-Fly PWM Frequency, Duty Cycle and Phase Shift Changes
• Two Analog Comparators
• 10-bit DAC for each analog comparator
• DACOUT pin to provide DAC output
• 10-Bit Resolution
• 8 Input Channels
• 2 Msps Conversion rate
• Independent Trigger Source Section for each Analog Input Conversion Pair
• UART Module with LIN and IrDA® support
• SPI Module with FIFO
• I2C™ Module with Master and Slave Modes
• 2 16-bit Timer Modules
• 1 Input Capture and 1 Output Compare / PWM

Parameter