• 简体中文
• English

LSM9DS0：iNEMO inertial module:3D accelerometer, 3D gyroscope, 3D magnetometer

The LSM9DS0 is a system-in-package featuring a 3D digital linear acceleration sensor, and a 3D digital angular rate sensor, a 3D digital magnetic sensor.

The LSM9DS0 has a linear acceleration full scale of ±2g/±4g/±6g/±8g/±16g, a magnetic field full scale of ±2/±4/±8/±12 gauss and an angular rate of ±245/±500/±2000 dps.

The LSM9DS0 includes an I²C serial bus interface supporting standard and fast mode (100 kHz and 400 kHz) and an SPI serial standard interface.

The system can be configured to generate interrupt signals on dedicated pins and is capable of motion and magnetic field detection. Thresholds and timing of interrupt generators are programmable by the end user.

Magnetic, accelerometer and gyroscope sensing can be enabled or set in power-down mode separately for smart power management.

The LSM9DS0 is available in a plastic land grid array package (LGA) and it is guaranteed to operate over an extended temperature range from -40 °C to +85 °C.

Key Features

• 3 acceleration channels, 3 angular rate channels, 3 magnetic field channels
• ±2/±4/±6/±8/±16 g linear acceleration full scale
• ±2/±4/±8/±12 gauss magnetic full scale
• ±245/±500/±2000 dps angular rate full scale
• 16-bit data output
• SPI / I2 C serial interfaces
• Analog supply voltage 2.4 V to 3.6 V
• Power-down mode / low-power mode
• Programmable interrupt generators
• Embedded self-test
• Embedded temperature sensor
• Embedded FIFO
• Position and motion detection functions
• Click/double-click recognition
• Intelligent power saving for handheld devices
• ECOPACK® , RoHS and “Green” compliant

Product Specifications

Technical Notes & Articles

Design Notes & Tips

Brochures

Product Evaluation Tools

Solution Evaluation Tools

Sample & Buy

Quality & Reliability