• 简体中文
• English

RHFLVDS315：Rad-Hard quad LVDS driver

The RHFLVDS315 is a quad, low-voltage, differential signaling (LVDS) driver specifically designed, packaged, and qualified for use in aerospace environments in a low-power and fast point-to-point baseband data transmission standard.

Operating at 3.3 V power supply, the RHFLVDS315 operates over a controlled impedance of 100-ohm transmission media that may be printed circuit board traces, back planes or cables.

The circuit features an internal fail-safe function to ensure a known state in case of floating input. All pins have cold spare buffers to ensure they are in high impedance when VCC is tied to GND.

Designed using ST's proprietary CMOS process with specific mitigation techniques, the RHFLVDS315 achieves “best in the class” for hardness to total ionisation dose and heavy ions.

The RHFLVDS315 can operate over a large temperature range of -55 °C to +125 °C and is housed in a hermetic Ceramic Flat-16 package.

Key Features

• LVDS output
• CMOS input
• Enable/Disable function with high-impedance
• ANSI TIA/EIA-644 compliant
• 400 Mbps (200 MHz)
• Cold spare on all pins
• 3.3 V operating power supply
• 4.8 V absolute rating
• Output voltage: 350 mV on 100 Ω load
• Hermetic package
• Guaranteed up to 300 krad TID
• SEL immune up to 135 MeV.cm²/mg
• SET/SEU immune up to 67 MeV.cm²/mg

Product Specifications

Technical Notes & Articles

Selection Guides

Sample & Buy

Quality & Reliability