• 简体中文
• English

SPC563MADPT176S：Daughter/adapter board for SPC563 series devices in QFP144 package

The SPC56XXMB is an evaluation system supporting the STMicroelectronics SPC56xx family of automotive microprocessors. The complete system consists of a SPC56XXMB motherboard and a mini module which plugs directly into the motherboard. Different mini modules are available for evaluating the whole family of devices in all supported packages.

The evaluation system allows full access to the CPU, to all of the CPU’s I/O signals and to the motherboard’s peripherals (such as CAN, SCI and LIN).

The mini module itself can be used as a stand-alone unit when access to the I/O pins or peripherals is not needed.

Key Features

• Prototyping area with 0.1” spacing and SOIC footprint
• Two LIN channels with jumper enable
• Expansion connectors for accessing all I/O signals
• One SCI channel with jumper enables, transceiver and DB9 female connector
• Specifications:
• 12 VDC Center Positive power supply with 2.5/5.5 mm barrel connector
• Two FlexRay channels with jumper enables
• Four user push buttons with jumper enable and polarity selection
• Four user LED’s with jumper enables
• Two CAN channels with jumper enable
• SPC56xx modular evaluation system
• Board power supply: 12 VDC external supply voltage
• On/off power switch with LED indicators
• Possibility to configure onboard peripherals to operate at 5 V or 3.3 V logic levels, depending on target
• Pin array for accessing all I/O signals
• Onboard STMicroelectronics® L9758 voltage regulator with three simultaneous output at 1.2 V, 3.3 V and 5 V
• One potentiometer for analog voltage input

Product Specifications

Schematic Packs

License Agreement

Product Evaluation Tools

Sample & Buy

Quality & Reliability