STEVAL-ISS001V2:Line interactive 450 W UPS reference design - 230 V / 50 Hz model

This UPS reference design was built employing off-line topology with AVR boost and buck regulation of the mains. The inverter module contains the push-pull DC-DC converter and the DC-AC output full bridge generating a quasi-sine waveform.

A microcontroller controls all UPS functions. It monitors the mains parameters (input/output mains voltage and phase, output inverter voltage, battery voltage, output current and output power) in order to ensure the proper level of the output voltage.

The UPS was designed with RS-232 joint signal and USB interfaces (USB for RS-232 converter). It is possible to connect the UPS to a PC using an RS-232 or USB cable and control the UPS status through the \"UPS Monitor 3.0x\" software that must be installed on the same PC.

Key Features

  • Battery quantity: 2 pieces
  • Backup time (full load): 2.5 - 3 min.
  • Battery capacity: 7.2 Ah
  • Battery nominal voltage: 12 V
  • Operating temperature: 0 °C to +40 °C
  • Battery recharge: two steps
  • Size (H x W x D): 175 mm x 120 mm x 430 mm
  • Storage temperature: -20 °C to +60 °C
  • Weight: 11 kg
  • Transfer time: Class 3 [EN62040-3]
  • On battery output waveform: quasi-sine (square wave)
  • Output rating power: 700 VA / 450 W
  • Input frequency: 50 Hz
  • Input voltage: 160 Vac ± 3% - 294 Vac ± 3%
  • Output frequency: 50 Hz ± 0.1 Hz
  • Typical recharge time: 8 h
  • EMI Classification: EN 62040-2
  • Output voltage: 184 - 265 Vac ± 3 Vac
  • Shipping weight: 11.5 kg
Product Specifications
DescriptionVersionSize
DB0593: Line interactive 450 W UPS reference design - 230 V / 50 Hz model1.2107 KB
Board Manufacturing Specifications
DescriptionVersionSize
PCB layout1.0262 KB
Bill of Materials
DescriptionVersionSize
Bill of materials1.051 KB
Schematic Packs
DescriptionVersionSize
Board schematic1.0208 KB
License Agreement
DescriptionVersionSize
Evaluation products license agreement1.0125 KB
Evaluation Tool Software
Part NumberManufacturerDescription
STSW-ISS001STSetup for STEVAL-ISS001V1 board
Sample & Buy
Part NumberCore ProductUnit Price (US$) *QuantityECCN (EU)ECCN (US)Country of Origin
STEVAL-ISS001V2ST72F324BJ6T62861NECEAR99-
Quality & Reliability
Part NumberPackageGradeRoHS Compliance GradeMaterial Declaration**
STEVAL-ISS001V2CARDIndustrialEcopack2
Line interactive 450 W UPS reference design - 230 V / 50 Hz model STEVAL-ISS001V2
Line interactive 450 W UPS reference design - 230 V / 50 Hz model STEVAL-ISS001V2
Line interactive 450 W UPS reference design - 230 V / 50 Hz model STEVAL-ISS001V2
Line interactive 450 W UPS reference design - 230 V / 50 Hz model STEVAL-ISS001V2
ST-LINK/V2 in-circuit debugger/programmer for STM8 and STM32 ST-LINK-V2