• 简体中文
• English

STR911FAW46：ARM966E-S™ 16/32-Bit Flash MCU with Ethernet, USB, CAN, AC motor control, 4 timers, ADC, RTC, DMA

STR91xFA is a series of ARM®-powered microcontrollers which combines a 16/32-bit ARM966E-S RISC processor core, dual-bank Flash memory, large SRAM for data or code, and a rich peripheral set to form an ideal embedded controller for a wide variety of applications such as point-of-sale terminals, industrial automation, security and surveillance, vending machines, communication gateways, serial protocol conversion, and medical equipment. The ARM966E-S core can perform single-cycle DSP instructions, good for speech processing, audio algorithms, and low-end imaging.

Key Features

• 16/32-bit 96 MHz ARM9E based MCU
  • ARM966E-S™ RISC core: Harvard archi-tecture, 5-stage pipeline, Tightly-Coupled Memories (SRAM and Flash)
  • STR91xFA implementation of core adds high-speed burst Flash memory interface, instruction prefetch queue, branch cache
  • Up to 96 MIPS directly from Flash memory
  • Single-cycle DSP instructions supported
  • Binary compatible with ARM7 code
• Dual burst Flash memories, 32-bits wide
  • 256 KB/512 KB/1 MB/2 MB main Flash
  • 32 KB/128 KB secondary Flash
  • Sequential Burst operation up to 96 MHz
  • 100 K min erase cycles, 20 yr min retention
• SRAM, 32-bits wide
  • 64K or 96K bytes, optional battery backup
• 9 programmable DMA channels
• Clock, reset, and supply management
  • Internal oscillator operating with external 4-25 MHz crystal
  • Internal PLL up to 96 MHz
  • Real-time clock provides calendar functions, tamper, and wake-up functions
  • Reset Supervisor monitors supply voltage, watchdog, wake-up unit, external reset
  • Brown-out monitor
  • Run, Idle, and Sleep Mode as low as 50 uA
• Vectored interrupt controller (VIC)
  • 32 IRQ vectors, 30 interrupt pins
  • Branch cache minimizes interrupt latency
• 8-channel, 10-bit A/D converter (ADC)
  • 0 to 3.6 V range, 0.7 usec conversion
• 10 Communication interfaces
  • 10/100 Ethernet MAC with DMA and MII
  • USB Full-speed (12 Mbps) slave device
  • CAN interface (2.0B Active)
  • 3 16550-style UARTs with IrDA protocol
  • 2 Fast I2C, 400 kHz
  • 2 channels for SPI, SSI™, or MICROWIRE™
• External Memory Interface (EMI)
  • 8- or 16-bit data, up to 24-bit addressing
  • Static Async modes for LQFP128
  • Additional burst synchronous modes for LFBGA144
• Up to 80 I/O pins (muxed with interfaces)
• 16-bit standard timers (TIM)
  • 4 timers each with 2 input capture, 2 output compare, PWM and pulse count modes
• 3-Phase induction motor controller (IMC)
• JTAG interface with boundary scan
• Embedded trace module (ARM® ETM9™)

Product Specifications

Application Notes

Technical Notes & Articles

User Manuals

Reference Manuals

Programming Manuals

Errata Sheets

Hardware Development Tools

Software Development Tools

MCUs Embedded Software

Sample & Buy

Quality & Reliability