• 简体中文
• English

MAX5186：双路、8位、40MHz、电流/电压、同时输出DAC

The MAX5186 contains two 8-bit, simultaneous-update, current-output digital-to-analog converters (DACs) designed for superior performance in communications systems requiring analog signal reconstruction with low distortion and low-power operation. The MAX5189 provides equal specifications, with on-chip precision resistors for voltage output operation. The MAX5186/ MAX5189 are designed for a 10pV-s glitch operation to minimize unwanted spurious signal components at the output. An on-board 1.2V bandgap circuit provides a well-regulated, low-noise reference that can be disabled for external reference operation. The MAX5186/MAX5189 are designed to provide a high level of signal integrity for the least amount of power dissipation. Both DACs operate from a single supply voltage of 2.7V to 3.3V. Additionally, these DACs have three modes of operation: normal, low-power standby, and complete shutdown, which provides the lowest possible power dissipation with a 1µA (max) shutdown current. A fast wake-up time (0.5µs) from standby mode to full DAC operation allows power conservation by activating the DACs only when required. The MAX5186/MAX5189 are packaged in a 28-pin QSOP and are specified for the extended (-40°C to +85°C) temperature range. For higher resolution, dual 10-bit versions, refer to the MAX5180/MAX5183 data sheet.

关键特性 2.7V to 3.3V Single-Supply Operation Wide Spurious-Free Dynamic Range: 70dB at fOUT = 2.2MHz Fully Differential Outputs for Each DAC ±0.5% FSR Gain Mismatch at fOUT = 2.2MHz ±0.15° Phase Mismatch at fOUT = 2.2MHz Low-Current Standby or Full Shutdown Modes Internal 1.2V, Low-Noise Bandgap Reference Small 28-Pin QSOP Package

MAX5186、MAX5189：功能框图 应用 任意波形发生器(AWG) 数字信号处理(DSP) 成像 I、Q信号重建 发送信号

数据手册DataSheet

关键参数

开发工具

• MAX5183EVKIT

质量和环境数据

• MAX5186.pdf

相关产品

• MAX5183：双路、10位、40MHz、电流/电压输出、同时刷新DAC
• MAX5180：双路、10位、40MHz、电流/电压输出、同时刷新DAC

订购型号