These octal bus transceivers are designed for 2-V to 5.5-V VCC operation.
The ’LV245A devices are designed for asynchronous communication between data buses. The device transmits data from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the direction-control (DIR) input. The output-enable (OE)\ input can be used to disable the device so the buses are effectively isolated.
To ensure the high-impedance state during power up or power down, OE\ should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
These devices are fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, preventing damaging current backflow through the devices when they are powered down
SN74LV245A | |
Voltage Nodes(V) | 5, 3.3, 2.5 |
Vcc range(V) | 2.0 to 5.5 |
Rating | Catalog |
Technology Family | LV-A |
器件 | 状态 | 温度 | 价格(美元) | 封装 | 引脚 | 封装数量 | 封装载体 | 丝印标记 |
SN74LV245ADW | ACTIVE | -40 to 85 | 3.05 | 1ku | SOIC (DW) | 20 | 25 | TUBE | |
SN74LV245ADWE4 | ACTIVE | -40 to 85 | 3.05 | 1ku | SOIC (DW) | 20 | 25 | TUBE | |
SN74LV245ADWG4 | ACTIVE | -40 to 85 | 3.05 | 1ku | SOIC (DW) | 20 | 25 | TUBE |
器件 | 环保计划* | 铅/焊球涂层 | MSL 等级/回流焊峰 | 环保信息与无铅 (Pb-free) | DPPM / MTBF / FIT 率 |
SN74LV245ADW | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-1-260C-UNLIM | SN74LV245ADW | SN74LV245ADW |
SN74LV245ADWE4 | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-1-260C-UNLIM | SN74LV245ADWE4 | SN74LV245ADWE4 |
SN74LV245ADWG4 | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-1-260C-UNLIM | SN74LV245ADWG4 | SN74LV245ADWG4 |