This octal bus transceiver is designed for asynchronous two-way communication between data buses. The control-function implementation minimizes external timing requirements.
The SN74LV245AT allows data transmission from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the direction-control (DIR) input. The output-enable (OE) input can be used to disable the device so that the buses are effectively isolated.
To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down
SN74LV245AT | |
Voltage Nodes(V) | 5 |
Vcc range(V) | 4.5 to 5.5 |
Input Level | TTL |
Output Level | CMOS |
Bus Drive(ma) | -16/16 |
No. of Outputs | 8 |
No. of Bits | 8 |
Logic | True |
Static Current | 0.002 |
tpd max(ns) | 7.7 |
Rating | Catalog |
Technology Family | LV-AT |
器件 | 状态 | 温度 | 价格(美元) | 封装 | 引脚 | 封装数量 | 封装载体 | 丝印标记 |
SN74LV245ATDW | ACTIVE | -40 to 85 | 3.05 | 1ku | SOIC (DW) | 20 | 25 | TUBE | |
SN74LV245ATDWE4 | ACTIVE | -40 to 85 | 3.05 | 1ku | SOIC (DW) | 20 | 25 | TUBE | |
SN74LV245ATDWG4 | ACTIVE | -40 to 85 | 3.05 | 1ku | SOIC (DW) | 20 | 25 | TUBE |
器件 | 环保计划* | 铅/焊球涂层 | MSL 等级/回流焊峰 | 环保信息与无铅 (Pb-free) | DPPM / MTBF / FIT 率 |
SN74LV245ATDW | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-1-260C-UNLIM | SN74LV245ATDW | SN74LV245ATDW |
SN74LV245ATDWE4 | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-1-260C-UNLIM | SN74LV245ATDWE4 | SN74LV245ATDWE4 |
SN74LV245ATDWG4 | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-1-260C-UNLIM | SN74LV245ATDWG4 | SN74LV245ATDWG4 |