This octal bus transceiver is designed specifically for low-voltage (3.3-V) VCC operation, but with the capability to provide a TTL interface to a 5-V system environment.
The SN74LVTH2245 is designed for asynchronous communication between data buses. The device transmits data from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the direction-control (DIR) input. The output-enable (OE)\ input can be used to disable the device so the buses are effectively isolated.
To ensure the high-impedance state during power up or power down, OE\ should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver
SN74LVTH2245 | |
Voltage Nodes(V) | 3.3, 2.7 |
Rating | Catalog |
Technology Family | LVT |
器件 | 状态 | 温度 | 价格(美元) | 封装 | 引脚 | 封装数量 | 封装载体 | 丝印标记 |
SN74LVTH2245DW | ACTIVE | -40 to 85 | 0.60 | 1ku | SOIC (DW) | 20 | 25 | TUBE | |
SN74LVTH2245DWE4 | ACTIVE | -40 to 85 | 0.60 | 1ku | SOIC (DW) | 20 | 25 | TUBE | |
SN74LVTH2245DWG4 | ACTIVE | -40 to 85 | 0.60 | 1ku | SOIC (DW) | 20 | 25 | TUBE |
器件 | 环保计划* | 铅/焊球涂层 | MSL 等级/回流焊峰 | 环保信息与无铅 (Pb-free) | DPPM / MTBF / FIT 率 |
SN74LVTH2245DW | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-1-260C-UNLIM | SN74LVTH2245DW | SN74LVTH2245DW |
SN74LVTH2245DWE4 | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-1-260C-UNLIM | SN74LVTH2245DWE4 | SN74LVTH2245DWE4 |
SN74LVTH2245DWG4 | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-1-260C-UNLIM | SN74LVTH2245DWG4 | SN74LVTH2245DWG4 |