The AM26LV31E-EP is a quadruple differential line driver with 3-state outputs. This driver has ±15-kV ESD (HBM and IEC61000-4-2, Air-Gap Discharge) and ±8-kV ESD (IEC61000-4-2, Contact Discharge) protection. This device is designed to meet TIA/EIA-422-B and ITU Recommendation V.11 drivers with reduced supply voltage.
The device is optimized for balanced-bus transmission at switching rates up to 32 MHz. The outputs have high current capability for driving balanced lines, such as twisted-pair transmission lines, and provide a high impedance in the power-off condition.
The AM26LV31E-EPI is characterized for operation from –40°C to 85°C
AM26LV31E-EP | |
Drivers Per Package | 4 |
Supply Voltage(s)(V) | 3.3 |
Supply Voltage(s)(Min)(V) | 3 |
Supply Voltage(s)(Max)(V) | 3.6 |
ESD(kV) | 15 |
Signaling Rate(Mbps) | 32 |
ICC(Max)(mA) | 0.1 |
Temp Range(C) | -55 to 105 |
Rating | HiRel Enhanced Product |
Operating Temperature Range(�C) | -55 to 105 |
# of TX/RX | 4 TX / 0 RX |
Pin/Package | 16SOIC |
器件 | 状态 | 温度 | 价格 | 封装 | 引脚 | 封装数量 | 封装载体 | 丝印标记 |
AM26LV31ESDREP | ACTIVE | -55 to 105 | 1.86 | 100u | SOIC (D) | 16 | 2500 | LARGE T&R | |
V62/09603-01XE | ACTIVE | -55 to 105 | 1.86 | 100u | SOIC (D) | 16 | 2500 | LARGE T&R |
器件 | 环保计划* | 铅/焊球涂层 | MSL 等级/回流焊峰 | 环保信息与无铅 (Pb-free) | DPPM / MTBF / FIT 率 |
AM26LV31ESDREP | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-1-260C-UNLIM | AM26LV31ESDREP | AM26LV31ESDREP |
V62/09603-01XE | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-1-260C-UNLIM | V62/09603-01XE | V62/09603-01XE |