ISO150 双路、隔离、双向数字耦合器
The ISO150 is a 2-channel, galvanically-isolated data coupler capable of data rates of 80M Baud, typical. Each channelcan be individually programmed to transmit data in either direction.
Data is transmitted across the isolation barrier by coupling complementary pulses through high voltage 0.4 pF capacitors. Receiver circuitry restores the pulses to standard logic levels. Differential signal transmission rejects isolation-mode voltage transients up to 1.6 kV/µs
The ISO150 avoids problems commonly associated with optocouplers. Optically isolated couplers require high current pulses and allowance must be made for LED aging. The ISO150's Bi-CMOS circuitry operates at 25 mW per channel.
The ISO150 is available in an SO-28 and is specified for operation from -40°C to 85°C
| ISO150 | |
| Number of Channels | 2 |
| Channel Configuration | Programmable |
| Insulation Rating(VRMS) | 1500 |
| Supply Voltage(s)(V) | 5 |
| Datarate(Mbps) | 80 |
| Input Noise Filter | None |
| Prop Delay(Max)(ns) | 40 |
| TTL/CMOS Input Threshold | TTL |
| Footprint | SO-28 |
| Rating | Catalog |
| Operating Temperature Range(°C) | -40 to 85 |
| Approx. Price (US$) | 8.10 | 1ku |
| Pin/Package | 12SOP |
| Thermal Shutdown | No |
ISO150 特性
- Replaces High-Performance Optocouplers
- Data Rate: 80 M Baud, Typ
- Low Power Consumption: 25 mW Per Channel, Max
- Two Channels, Each Bidirectional, Programmable by User
- Partial Discharge Tested: 2400 Vrms
- Creepage Distance of 7,2 mm
- Low Cost Per Channel
- Available in SO Package
- UL 1577 Certified
- APPLICATIONS
- Digital Isolation for A/D, D/A Conversion
- Isolated RS-485 Interface
- Multiplexed Data Transmission
- Isolated Parallel to Serial Interface
- Test Equipment
- Microprocessor System Interface
- Isolated Line Receiver
- Ground Loop Elimination
ISO150 芯片订购指南
| 器件 | 状态 | 温度 | 价格 | 封装 | 引脚 | 封装数量 | 封装载体 | 丝印标记 |
| ISO150AU | ACTIVE | -40 to 85 | 9.70 | 1ku | SOP (DVB) | 12 | 20 | TUBE | |
| ISO150AU/1K | ACTIVE | 8.10 | 1ku | SOP (DVB) | 12 | 1000 | LARGE T&R | ||
| ISO150AU/1KG4 | ACTIVE | 8.10 | 1ku | SOP (DVB) | 12 | 1000 | LARGE T&R | ||
| ISO150AUE4 | ACTIVE | -40 to 85 | 9.70 | 1ku | SOP (DVB) | 12 | 20 | TUBE | |
| ISO150AUG4 | ACTIVE | -40 to 85 | 9.70 | 1ku | SOP (DVB) | 12 | 20 | TUBE |
ISO150 质量与无铅数据
| 器件 | 环保计划* | 铅/焊球涂层 | MSL 等级/回流焊峰 | 环保信息与无铅 (Pb-free) | DPPM / MTBF / FIT 率 |
| ISO150AU | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-3-260C-168 HR | ISO150AU | ISO150AU |
| ISO150AU/1K | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-3-260C-168 HR | ISO150AU/1K | ISO150AU/1K |
| ISO150AU/1KG4 | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-3-260C-168 HR | ISO150AU/1KG4 | ISO150AU/1KG4 |
| ISO150AUE4 | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-3-260C-168 HR | ISO150AUE4 | ISO150AUE4 |
| ISO150AUG4 | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-3-260C-168 HR | ISO150AUG4 | ISO150AUG4 |
ISO150 应用技术支持与电子电路设计开发资源下载
- ISO150 数据资料 dataSheet 下载.PDF
- TI 德州仪器隔离器选型与价格 . xls
- 所选封装材料的热学和电学性质 (PDF 645 KB)
- 使用数字隔离器设计隔离式 I2C 总线接口 (zhct119.PDF, 339 KB)
- 1Q 2011 Issue Analog Applications Journal (slyt399.PDF, 964 KB)
- 接口选择指南 (Rev. D) (PDF 2994 KB)
- Signaling Rate vs. Distance for Differential Buffers (PDF 420 KB)
- Q1 2009 Issue Analog Applications Journal (slyt319.PDF, 1.39 MB)
- Isolated RS-485 Reference Design (PDF 80 KB)
- 无铅组件涂层的保存期评估 (PDF 1305 KB)
- Analog Signal Chain Guide (8.62 MB)
- Industrial Interface IC Solutions (101 KB)
