The LME49610 is a high performance, low distortion high fidelity 250mA audio buffer. The LME49610 is designed for a wide range of applications. When used inside the feedback loop of an op amp, it increases output current, improves capacitive load drive, and eliminates thermal feedback.
The LME49610 offers a pin-selectable bandwidth: a low current, 120MHz bandwidth mode that consumes 13mA and a wide 200MHz bandwidth mode that consumes 19mA. In both modes the LME49610 has a nominal 2000V/μs slew rate. Bandwidth is easily adjusted by either leaving the BW pin unconnected, connecting it to the VEE pin or connecting a resistor between the BW pin and the VEE pin.
The LME49610 is fully protected through internal current limit and thermal shutdown
| LME49610 | |
| Supply Min (Min) (Volt) | 5 |
| Supply Max (Max) (Volt) | 44 |
| Shutdown | No |
| Headphone Channels | Mono |
| Vmax (V) | 44 |
| THD + N @ 1 kHz (%) | 0.00003 |
| Vmin (V) | 5 |
| Number of Channels | 1 |
| GBW (Typ) (MHz) | 200 |
| Vn at Flatband (Typ) (nV/rtHz) | 3 |
