MSP430BT5190 专为与基于 CC2560 TI Bluetooth® 的解决方案配合使用而设计的 16 位微处理器

The Texas Instruments MSP430 family of ultralow-power microcontrollers consists of several devices featuring different sets of peripherals targeted for various applications. The architecture, combined with extensive low-power modes, is optimized to achieve extended battery life in portable measurement applications. The device features a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency. The digitally controlled oscillator (DCO) allows wake-up from low-power modes to active mode in less than 5 µs.

MSP430BT5190 is a microcontroller configuration with three 16-bit timers, a high performance 12-bit analog-to-digital (A/D) converter, up to four universal serial communication interfaces (USCI), hardware multiplier, DMA, real-time clock module with alarm capabilities, and up to 87 I/O pins

	MSP430BT5190
Frequency (MHz)	25
Flash (KB)	256
SRAM (B)	16384
Timers - 16-bit	3
Watchdog	Yes
Real-Time Clock	Yes
Brown Out Reset	Yes
SVS	Yes
USCI_A (UART/LIN/IrDA/SPI)	4
USCI_B (I2C & SPI)	4
DMA	Yes
Multiplier	32x32
Temp Sensor	Yes
ADC	12-bit SAR
ADC Channels	16
Pin/Package	100LQFP, 113BGA MICROSTAR JUNIOR
Approx. Price (US$)	4.95 \| 1ku

MSP430BT5190 特性

Designed for Use With CC2560 TI Bluetooth® Based Solutions(1)
Commercially Licensed MindTree Ethermind Bluetooth Stack for MSP430
- Bluetooth v2.1 + Enhanced Data Rate (EDR) Compliant
- Serial Port Profile (SPP)
- Sample Applications
Low Supply Voltage Range: 1.8 V to 3.6 V
Ultralow Power Consumption< ul>
Active Mode (AM): All System Clocks Active 230 µA/MHz at 8 MHz, 3.0 V, Flash Program Execution (Typical) 110 µA/MHz at 8 MHz, 3.0 V, RAM Program Execution (Typical)
Standby Mode (LPM3): Real-Time Clock With Crystal , Watchdog, and Supply Supervisor Operational, Full RAM Retention, Fast Wake-Up: 1.7 µA at 2.2 V, 2.1 µA at 3.0 V (Typical) Low-Power Oscillator (VLO), General-Purpose Counter, Watchdog, and Supply Supervisor Operational, Full RAM Retention, Fast Wake-Up: 1.2 µA at 3.0 V (Typical)
Off Mode (LPM4): Full RAM Retention, Supply Supervisor Operational, Fast Wake-Up: 1.2 µA at 3.0 V (Typical)
Shutdown Mode (LPM4.5): 0.1 µA at 3.0 V (Typical)

Wake-Up From Standby Mode in Less Than 5 µs
16-Bit RISC Architecture
Flexible Power Management System
- Fully Integrated LDO With Programmable Regulated Core Supply Voltage
- Supply Voltage Supervision, Monitoring, and Brownout
Unified Clock System
- FLL Control Loop for Frequency Stabilization
- Low-Power/Low-Frequency Internal Clock Source (VLO)
- Low-Frequency Trimmed Internal Reference Source (REFO)

MSP430BT5190 芯片订购指南

器件	状态	温度	价格	封装 \| 引脚	封装数量 \| 封装载体	丝印标记
MSP430BT5190IPZ	ACTIVE		4.95 \| 1ku	LQFP (PZ) \| 100	90
MSP430BT5190IPZR	ACTIVE		4.95 \| 1ku	LQFP (PZ) \| 100	1000 \| LARGE T&R
MSP430BT5190IZQWR	ACTIVE		4.95 \| 1ku	BGA MICROSTAR JUNIOR (ZQW) \| 113	1 \| LARGE T&R
MSP430BT5190IZQWT	ACTIVE		4.95 \| 1ku	BGA MICROSTAR JUNIOR (ZQW) \| 113	250 \| SMALL T&R

MSP430BT5190 质量与无铅数据

器件	环保计划*	铅/焊球涂层	MSL 等级/回流焊峰	环保信息与无铅 (Pb-free)	DPPM / MTBF / FIT 率
MSP430BT5190IPZ	Green (RoHS & no Sb/Br)	CU NIPDAU	Level-3-260C-168 HR	MSP430BT5190IPZ	MSP430BT5190IPZ
MSP430BT5190IPZR	Green (RoHS & no Sb/Br)	CU NIPDAU	Level-3-260C-168 HR	MSP430BT5190IPZR	MSP430BT5190IPZR
MSP430BT5190IZQWR	Green (RoHS & no Sb/Br)	SNAGCU	Level-3-260C-168 HR	MSP430BT5190IZQWR	MSP430BT5190IZQWR
MSP430BT5190IZQWT	Green (RoHS & no Sb/Br)	SNAGCU	Level-3-260C-168 HR	MSP430BT5190IZQWT	MSP430BT5190IZQWT

MSP430BT5190 工具与软件

培训内容	型号	软件/工具类型
Code Composer Studio (CCStudio) 集成开发环境 (IDE) v5	CCSTUDIO	Code Composer Studio(TM) IDE
MSP430 20 和 28 引脚插座目标板	MSP-TS430PW28	开发电路板/EVM
MSP430 OTP 和 UV-EPROM 串行编程器	MSP-PRGS430	开发电路板/EVM
MSP430 USB 调试接口	MSP-FET430UIF	开发电路板/EVM
MSP430 并行端口调试接口	MSP-FET430PIF	开发电路板/EVM
MSP430 系统内置群组程序设计器	MSP-GANG430	开发电路板/EVM
电容式触摸感应库	CAPSENSELIBRARY	特定应用库
IAR 嵌入式工作平台 - 免费 4KB IDE	IAR-KICKSTART	第三方开发环境