ONET8501P 11.3 Gbps 可选速率限幅放大器
The ONET8501P is a high-speed, 3.3-V limiting amplifier for multiple fiber optic and copper cable applications with data rates from 2 Gbps up to 11.3 Gbps.
The device provides a two-wire serial interface which allows digital control of the bandwidth, output amplitude, output pre-emphasis, input threshold voltage (slice level) and the loss of signal assert level. Predetermined settings for bandwidth and LOS assert levels can also be selected with external rate selection pins.
The ONET8501P provides a gain of about 40dB which ensures a fully differential output swing for input signals as low as 10 mVpp. The output amplitude can be adjusted to 300 mVpp, 600 mVpp, or 900 mVpp. To compensate for frequency dependent loss of microstrips or striplines connected to the output of the device, programmable pre-emphasis is included in the output stage
|
ONET8501P |
| Data Rate(Typ)(Gbps) |
11.3 |
| Gain(Typ)(dB) |
40 |
| DJ(Typ)(ps) |
4 |
| ICC(Max)(mA) |
61 |
| ICC(Nom)(mA) |
48 |
| Operating Temperature Range(�C) |
-40 to 100 |
| Pin/Package |
16QFN |
| RJ(Max)(ps) |
1 |
| tf(Typ)(ps) |
25 |
| tr(Typ)(ps) |
25 |
| VCC(V) |
3.3 |
| Vin Min(Nom)(mV p-p) |
5 |
| Vin Max(Min)(mV p-p) |
2000 |
| Vout(Min)(mV p-p) |
500 |
ONET8501P 特性
- Up to 11.3-Gbps Operation
- 2-Wire Digital Interface
- Digitally Selectable Input Bandwidth
- Adjustable LOS Threshold
- Digitally Selectable Output Voltage
- Digitally Selectable Output Pre-Emphasis
- Adjustable Input Threshold Voltage
- Low Power Consumption
- Input Offset Cancellation
- CML Data Outputs with On-Chip 50-
Back-Termination to VCC
- Single +3.3-V Supply
- Output Disable
- Surface Mount Small Footprint 3 mm × 3 mm 16-Pin RoHS compliant QFN Package
- APPLICATIONS
- 10-Gigabit Ethernet Optical Receivers
- 8x and 10x Fiber Channel Optical Receivers
- SONET OC-192/SDH-64 Optical Receivers
- SFP+ and XFP Transceiver Modules
- XENPAK, XPAK, X2 and 300-pin MSA Transponder Modules
- Cable Driver and Receiver
ONET8501P 芯片订购指南
| 器件 |
状态 |
温度 |
价格 |
封装 | 引脚 |
封装数量 | 封装载体 |
丝印标记 |
| ONET8501PRGTR |
ACTIVE |
-40 to 85 |
3.95 | 1ku |
QFN (RGT) | 16 |
3000 | LARGE T&R |
|
| ONET8501PRGTRG4 |
ACTIVE |
-40 to 85 |
3.95 | 1ku |
QFN (RGT) | 16 |
3000 | LARGE T&R |
|
| ONET8501PRGTT |
ACTIVE |
-40 to 85 |
4.55 | 1ku |
QFN (RGT) | 16 |
250 | SMALL T&R |
|
| ONET8501PRGTTG4 |
ACTIVE |
-40 to 85 |
4.55 | 1ku |
QFN (RGT) | 16 |
250 | SMALL T&R |
|
ONET8501P 质量与无铅数据
| 器件 |
环保计划* |
铅/焊球涂层 |
MSL 等级/回流焊峰 |
环保信息与无铅 (Pb-free) |
DPPM / MTBF / FIT 率 |
| ONET8501PRGTR |
Pb-Free (RoHS) |
CU NIPDAU |
Level-2-260C-1 YEAR |
ONET8501PRGTR |
ONET8501PRGTR |
| ONET8501PRGTRG4 |
Pb-Free (RoHS) |
CU NIPDAU |
Level-2-260C-1 YEAR |
ONET8501PRGTRG4 |
ONET8501PRGTRG4 |
| ONET8501PRGTT |
Pb-Free (RoHS) |
CU NIPDAU |
Level-2-260C-1 YEAR |
ONET8501PRGTT |
ONET8501PRGTT |
| ONET8501PRGTTG4 |
Pb-Free (RoHS) |
CU NIPDAU |
Level-2-260C-1 YEAR |
ONET8501PRGTTG4 |
ONET8501PRGTTG4 |
ONET8501P 应用技术支持与电子电路设计开发资源下载
- ONET8501P 数据资料 dataSheet 下载.PDF
- TI 德州仪器光纤模块 IC选型与价格 . xls
- 所选封装材料的热学和电学性质 (PDF 645 KB)
- 使用数字隔离器设计隔离式 I2C 总线接口 (zhct119.PDF, 339 KB)
- 1Q 2011 Issue Analog Applications Journal (slyt399.PDF, 964 KB)
- 接口选择指南 (Rev. D) (PDF 2994 KB)
- Signaling Rate vs. Distance for Differential Buffers (PDF 420 KB)
- Q1 2009 Issue Analog Applications Journal (slyt319.PDF, 1.39 MB)
- Isolated RS-485 Reference Design (PDF 80 KB)
- 无铅组件涂层的保存期评估 (PDF 1305 KB)
- Analog Signal Chain Guide (8.62 MB)
- Industrial Interface IC Solutions (101 KB)
ONET8501P 工具和软件
