The Tag-it HF-I Standard Transponder IC is part of the TI 13.56 MHz product family which is based on the ISO/IEC 15693 standard for contactless integrated circuit cards (vicinity cards) and ISO/IEC 18000-3 standard for item management. The Tag-it HF-I Standard Transponder IC builds the basis for various available inlay shapes which are used as consumable smart labels in markets requiring quick and accurate identification of items.
User data is written to and read from memory blocks using a non-volatile EEPROM silicon technology. Each block is separately programmable by the user and can be locked to protect data from modification. Once the data has been ‘locked’ then it cannot be changed.
To give some examples, information about delivery checkpoints and timing, place of origin/destination, pallet assignments, inventory numbers and even transportation routes can be coded into the transponder.
| RF-HDT-WNME | |
| Standard | ISO15693 ISO18000-3 |
| Frequency | 13.56 MHz |
| Factory Programmed Read Only Number (bits) | 64 |
| User programmable Memory (bits) | 256 |
| Output Impedance (pF) | 23.5 |
| Die Processing | unprocessed |
| Minimum Antenna Input Voltage @ ftx (Volts) | 2.5 |
| Anticollision | Yes |
| Data Retention Time (Years) | 10 |
| Chip Thickness (micrometers) | 720 |
| Operating Temperature Range (°C) | -25 to 70 |
| Storage Temperature (°C) | -40 to 85 |
| 器件 | 状态 | 温度 | 价格（美元） | 封装 | 引脚 | 封装数量 | 封装载体 | 丝印标记 |
| RF-HDT-WNME-M0 | ACTIVE | 0.10 | 1ku | WAFERSALE (YS) | 0 | 1 |
| 器件 | 环保计划* | 铅/焊球涂层 | MSL 等级/回流焊峰 | 环保信息与无铅 (Pb-free) | DPPM / MTBF / FIT 率 |
| RF-HDT-WNME-M0 | RF-HDT-WNME-M0 | RF-HDT-WNME-M0 |
