The DS8830, SN55183, and SN75183 dual differential line drivers are designed to provide differential output signals with high current capability for driving balanced lines, such as twisted pair, at normal line impedances without high power dissipation. These devices can be used as TTL expander/phase splitters, because the output stages are similar to TTL totem-pole outputs.
The driver is of monolithic single-chip construction, and both halves of the dual circuits use common power supply and ground terminals.
The SN55183 is characterized for operation over the full military temperature range of -55°C to 125°C. The DS8830 and SN75183 are characterized for operation from 0°C to 70°C
SN55183 | |
Drivers Per Package | 2 |
Driver (RL)(Ohms) | 100 |
Operating Temperature Range(�C) | -55 to 125 |
Footprint | DS8830 |
Pin/Package | 14CDIP, 14CFP, 20LCCC |
Rating | Military |
器件 | 状态 | 温度 | 价格 | 封装 | 引脚 | 封装数量 | 封装载体 | 丝印标记 |
SN55183J | ACTIVE | -55 to 125 | 6.36 | 100u | CDIP (J) | 14 | 1 | TUBE | |
SNJ55183FK | ACTIVE | -55 to 125 | 20.72 | 100u | LCCC (FK) | 20 | 1 | TUBE | |
SNJ55183J | ACTIVE | -55 to 125 | 7.14 | 100u | CDIP (J) | 14 | 1 | TUBE | |
SNJ55183W | ACTIVE | -55 to 125 | 19.07 | 100u | CFP (W) | 14 | 1 | TUBE |
器件 | 环保计划* | 铅/焊球涂层 | MSL 等级/回流焊峰 | 环保信息与无铅 (Pb-free) | DPPM / MTBF / FIT 率 |
SN55183J | TBD | A42 | N/A for Pkg Type | SN55183J | SN55183J |
SNJ55183FK | TBD | POST-PLATE | N/A for Pkg Type | SNJ55183FK | SNJ55183FK |
SNJ55183J | TBD | A42 | N/A for Pkg Type | SNJ55183J | SNJ55183J |
SNJ55183W | TBD | A42 | N/A for Pkg Type | SNJ55183W | SNJ55183W |