SN65HVD07 高输出 RS-485 收发器
The SN65HVD05, SN75HVD05, SN65HVD06, SN75HVD06, SN65HVD07, and SN75HVD07 combine a 3-state differential line driver and differential line receiver. They are designed for balanced data transmission and interoperate with ANSI TIA/EIA-485-A and ISO 8482E standard-compliant devices. The driver is designed to provide a differential output voltage greater than that required by these standards for increased noise margin. The drivers and receivers have active-high and active-low enables respectively, which can be externally connected together to function as direction control.
The driver differential outputs and receiver differential inputs connect internally to form a differential input/ output (I/O) bus port that is designed to offer minimum loading to the bus whenever the driver is disabled or not powered
|
SN65HVD07 |
| Drivers Per Package |
1 |
| Receivers Per Package |
1 |
| Supply Voltage(s)(V) |
5 |
| ESD(kV) |
16 |
| Temp Range(C) |
-40 to 85 |
| Signaling Rate(Mbps) |
1 |
| ICC(Max)(mA) |
15 |
| Fail Safe |
Idle, Open, Short |
| Isolated |
No |
| # of TX/RX |
1 TX / 1 RX |
| Common Mode Range |
-7 to 12 |
| Number of Nodes |
256 |
| Duplex |
Half |
| Footprint |
SN75176 |
| Comments |
High Output Transceiver - 1 Mbps |
| Pin/Package |
8PDIP, 8SOIC |
| Rating |
Catalog |
| Fault Protection(V) |
-9 to 14 |
SN65HVD07 特性
- Minimum Differential Output Voltage of 2.5 V Into a 54-
Load
- Open-Circuit, Short-Circuit, and Idle-Bus Failsafe Receiver
- 1/8th Unit-Load Option Available (Up to 256 Nodes on the Bus)
- Bus-Pin ESD Protection Exceeds 16 kV HBM
- Driver Output Slew Rate Control Options
- Electrically Compatible With ANSI TIA/EIA-485-A Standard
- Low-Current Standby Mode: 1 µA Typical
- Glitch-Free Power-Up and Power-Down Protection for Hot-Plugging Applications
- Pin Compatible With Industry Standard SN75176
- APPLICATIONS
- Data Transmission Over Long or Lossy Lines or Electrically Noisy Environments
- Profibus Line Interface
- Industrial Process Control Networks
- Point-of-Sale (POS) Networks
- Electric Utility Metering
- Building Automation
- Digital Motor Control
SN65HVD07 芯片订购指南
| 器件 |
状态 |
温度 |
价格 |
封装 | 引脚 |
封装数量 | 封装载体 |
丝印标记 |
| SN65HVD07D |
ACTIVE |
-40 to 85 |
1.95 | 1ku |
SOIC (D) | 8 |
75 | TUBE |
|
| SN65HVD07DG4 |
ACTIVE |
-40 to 85 |
1.95 | 1ku |
SOIC (D) | 8 |
75 | TUBE |
|
| SN65HVD07DR |
ACTIVE |
-40 to 85 |
1.65 | 1ku |
SOIC (D) | 8 |
2500 | LARGE T&R |
|
| SN65HVD07DRG4 |
ACTIVE |
-40 to 85 |
1.65 | 1ku |
SOIC (D) | 8 |
2500 | LARGE T&R |
|
| SN65HVD07P |
ACTIVE |
-40 to 85 |
1.95 | 1ku |
PDIP (P) | 8 |
50 | TUBE |
|
| SN65HVD07PE4 |
ACTIVE |
-40 to 85 |
1.95 | 1ku |
PDIP (P) | 8 |
50 | TUBE |
|
SN65HVD07 质量与无铅数据
| 器件 |
环保计划* |
铅/焊球涂层 |
MSL 等级/回流焊峰 |
环保信息与无铅 (Pb-free) |
DPPM / MTBF / FIT 率 |
| SN65HVD07D |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-1-260C-UNLIM |
SN65HVD07D |
SN65HVD07D |
| SN65HVD07DG4 |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-1-260C-UNLIM |
SN65HVD07DG4 |
SN65HVD07DG4 |
| SN65HVD07DR |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-1-260C-UNLIM |
SN65HVD07DR |
SN65HVD07DR |
| SN65HVD07DRG4 |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-1-260C-UNLIM |
SN65HVD07DRG4 |
SN65HVD07DRG4 |
| SN65HVD07P |
Pb-Free (RoHS) |
CU NIPDAU |
N/A for Pkg Type |
SN65HVD07P |
SN65HVD07P |
| SN65HVD07PE4 |
Pb-Free (RoHS) |
CU NIPDAU |
N/A for Pkg Type |
SN65HVD07PE4 |
SN65HVD07PE4 |
SN65HVD07 应用技术支持与电子电路设计开发资源下载
- SN65HVD07 数据资料 dataSheet 下载.PDF
- TI 德州仪器RS-485选型与价格 . xls
- 所选封装材料的热学和电学性质 (PDF 645 KB)
- 使用数字隔离器设计隔离式 I2C 总线接口 (zhct119.PDF, 339 KB)
- 1Q 2011 Issue Analog Applications Journal (slyt399.PDF, 964 KB)
- 接口选择指南 (Rev. D) (PDF 2994 KB)
- Signaling Rate vs. Distance for Differential Buffers (PDF 420 KB)
- Q1 2009 Issue Analog Applications Journal (slyt319.PDF, 1.39 MB)
- Isolated RS-485 Reference Design (PDF 80 KB)
- 无铅组件涂层的保存期评估 (PDF 1305 KB)
- Analog Signal Chain Guide (8.62 MB)
- Industrial Interface IC Solutions (101 KB)
SN65HVD07 工具和软件
