SN65HVD379 3.3V 全双工 RS-485/RS-422 驱动器和平衡接收器
The SN65HVD379 is a differential line driver and differential-input line receiver that operates with a 3.3-V power supply. Each driver and receiver has separate input and output pins for full-duplex bus communication designs. They are designed for balanced transmission lines and interoperation with ANSI TIA/EIA-485A, TIA/EIA-422-B, ITU-T v.11, and ISO 8482:1993 standard-compliant devices.
These differential bus drivers and receivers are monolithic, integrated circuits designed for full-duplex bi-directional data communication on multipoint bus-transmission lines at signaling rates(1) up to 25 Mbps. The SN65HVD379 is fully enabled with no external enabling pins.
The 1/2 unit load receiver has a higher receiver input resistance.
|
SN65HVD379 |
| Drivers Per Package |
1 |
| Receivers Per Package |
1 |
| Supply Voltage(s)(V) |
3.3 |
| ESD(kV) |
16 |
| Temp Range(C) |
-40 to 85 |
| Signaling Rate(Mbps) |
25 |
| ICC(Max)(mA) |
2.1 |
| Fail Safe |
Open |
| Isolated |
No |
| # of TX/RX |
1 TX / 1 RX |
| Common Mode Range |
-7 to 12 |
| Number of Nodes |
64 |
| Duplex |
Full |
| Footprint |
SN75179 |
| Pin/Package |
8SOIC |
| Rating |
Catalog |
| Fault Protection(V) |
-9 to 14 |
SN65HVD379 特性
- Designed for INTERBUS Applications
- Designed for RS-422 and RS-485 Networks
- Balanced Receiver Thresholds
- 1/2 Unit-Load (up to 64 nodes on the bus)
- Bus-Pin ESD Protection 15 kV HBM
- Bus-Fault Protection of -7 V to 12 V
- Thermal Shutdown Protection
- Power-Up/Down Glitch-free Bus Inputs and Outputs
- High Input Impedance With Low VCC
- Monotonic Outputs During Power Cycling
- 5-V Tolerant Inputs
- APPLICATIONS
- Digital Motor Control
- Utility Meters
- Chassis-to-Chassis Interconnections
- Electronic Security Stations
- Industrial, Process, and Building Automation
- Point-of-Sale (POS) Terminals and Networks
- DTE/DCE Interfaces
SN65HVD379 芯片订购指南
| 器件 |
状态 |
温度 |
价格 |
封装 | 引脚 |
封装数量 | 封装载体 |
丝印标记 |
| SN65HVD379D |
ACTIVE |
-40 to 85 |
1.90 | 1ku |
SOIC (D) | 8 |
75 | TUBE |
|
| SN65HVD379DG4 |
ACTIVE |
-40 to 85 |
1.90 | 1ku |
SOIC (D) | 8 |
75 | TUBE |
|
| SN65HVD379DR |
ACTIVE |
-40 to 85 |
1.60 | 1ku |
SOIC (D) | 8 |
2500 | LARGE T&R |
|
| SN65HVD379DRG4 |
ACTIVE |
-40 to 85 |
1.60 | 1ku |
SOIC (D) | 8 |
2500 | LARGE T&R |
|
SN65HVD379 质量与无铅数据
| 器件 |
环保计划* |
铅/焊球涂层 |
MSL 等级/回流焊峰 |
环保信息与无铅 (Pb-free) |
DPPM / MTBF / FIT 率 |
| SN65HVD379D |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-1-260C-UNLIM |
SN65HVD379D |
SN65HVD379D |
| SN65HVD379DG4 |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-1-260C-UNLIM |
SN65HVD379DG4 |
SN65HVD379DG4 |
| SN65HVD379DR |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-1-260C-UNLIM |
SN65HVD379DR |
SN65HVD379DR |
| SN65HVD379DRG4 |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-1-260C-UNLIM |
SN65HVD379DRG4 |
SN65HVD379DRG4 |
SN65HVD379 应用技术支持与电子电路设计开发资源下载
- SN65HVD379 数据资料 dataSheet 下载.PDF
- TI 德州仪器RS-485选型与价格 . xls
- 所选封装材料的热学和电学性质 (PDF 645 KB)
- 使用数字隔离器设计隔离式 I2C 总线接口 (zhct119.PDF, 339 KB)
- 1Q 2011 Issue Analog Applications Journal (slyt399.PDF, 964 KB)
- 接口选择指南 (Rev. D) (PDF 2994 KB)
- Signaling Rate vs. Distance for Differential Buffers (PDF 420 KB)
- Q1 2009 Issue Analog Applications Journal (slyt319.PDF, 1.39 MB)
- Isolated RS-485 Reference Design (PDF 80 KB)
- 无铅组件涂层的保存期评估 (PDF 1305 KB)
- Analog Signal Chain Guide (8.62 MB)
- Industrial Interface IC Solutions (101 KB)
SN65HVD379 工具和软件
