SN65HVD96 SymPol 收发器
The SN65HVD96 is specifically designed to meet the requirements for a transceiver which operates with no errors if the twisted-pair signal wires are connected normally or reversed. This allows for error free operation in applications where the signal wires may become inadvertently reversed during installation or maintenance. This feature is corrected internally so no intervention from the controller or operator is required.
Similar to RS-485, these transceivers can be used for point-to-point, multi-drop, or multi-point networks. Sympol devices are not backwards compatible with, but are an upgrade to, existing RS-485 networks. The pin-out is identical to the industry-standard SN75176 transceiver, allowing direct upgrade from RS-485 to SymPol
|
SN65HVD96 |
Drivers Per Package |
1 |
Receivers Per Package |
1 |
Supply Voltage(s)(V) |
5 |
ESD(kV) |
12 |
Temp Range(C) |
-40 to 85 |
Signaling Rate(Mbps) |
5 |
ICC(Max)(mA) |
20 |
Fail Safe |
Idle, Open, Short |
Isolated |
No |
# of TX/RX |
1 TX / 1 RX |
Common Mode Range |
-7 to 12 |
Number of Nodes |
32 |
Duplex |
Half |
Footprint |
SN75176 |
Comments |
Cross Wire Immunity |
Pin/Package |
8SOIC |
Rating |
Catalog |
Fault Protection(V) |
-35 to 40 |
SN65HVD96 特性
- Communicate Without Errors on Normal or Reversed-Wire Bus Lines
- Up to 5 Mbps Signaling
- Industrial Temperature Range: –40°C to 85°C
- Symmetric Polarity Receiver
- Receiver Hysteresis > 100 mV
- Connect up to 32 Nodes Plus Parallel Terminators on one Bus,
or Connect up to 200 Nodes on an Unterminated Bus
- Transient Protection
- ±12 kV Human Body Model on Bus Pins
- ±25 V Repetitive Transient Pulse on Bus Pins
- Additional Reliability Features:
- Bus Standoff From –35 V to 40 V
- Driver Output Short-Circuit Current Limit
- Automatic Thermal Shutdown and Recovery
SN65HVD96 芯片订购指南
器件 |
状态 |
温度 |
价格 |
封装 | 引脚 |
封装数量 | 封装载体 |
丝印标记 |
SN65HVD96D |
ACTIVE |
-40 to 85 |
1.45 | 1ku |
SOIC (D) | 8 |
75 | TUBE |
|
SN65HVD96DR |
ACTIVE |
-40 to 85 |
1.20 | 1ku |
SOIC (D) | 8 |
2500 | LARGE T&R |
|
SN65HVD96 质量与无铅数据
器件 |
环保计划* |
铅/焊球涂层 |
MSL 等级/回流焊峰 |
环保信息与无铅 (Pb-free) |
DPPM / MTBF / FIT 率 |
SN65HVD96D |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-1-260C-UNLIM |
SN65HVD96D |
SN65HVD96D |
SN65HVD96DR |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-1-260C-UNLIM |
SN65HVD96DR |
SN65HVD96DR |
SN65HVD96 应用技术支持与电子电路设计开发资源下载
- SN65HVD96 数据资料 dataSheet 下载.PDF
- TI 德州仪器RS-485选型与价格 . xls
- 所选封装材料的热学和电学性质 (PDF 645 KB)
- 使用数字隔离器设计隔离式 I2C 总线接口 (zhct119.PDF, 339 KB)
- 1Q 2011 Issue Analog Applications Journal (slyt399.PDF, 964 KB)
- 接口选择指南 (Rev. D) (PDF 2994 KB)
- Signaling Rate vs. Distance for Differential Buffers (PDF 420 KB)
- Q1 2009 Issue Analog Applications Journal (slyt319.PDF, 1.39 MB)
- Isolated RS-485 Reference Design (PDF 80 KB)
- 无铅组件涂层的保存期评估 (PDF 1305 KB)
- Analog Signal Chain Guide (8.62 MB)
- Industrial Interface IC Solutions (101 KB)
SN65HVD96 工具和软件