SN65LBC176A-EP 增强型产品差动总线收发器
The SN65LBC176A-EP differential bus transceiver is a monolithic, integrated circuits designed for bidirectional data communication on multipoint bus-transmission lines. The SN65LBC176A-EP is designed for balanced transmission lines and is compatible with ANSI standard TIA/EIA-485-A and ISO 8482. The SN65LBC176A-EP offers improved switching performance over its predecessors without sacrificing significantly more power.
The SN65LBC176A-EP combines a 3-state, differential line driver and a differential input line receiver, both of which operate from a single 5-V power supply. The driver and receiver have active-high and active-low enables, respectively, which can externally connect together to function as a direction control.
|
SN65LBC176A-EP |
| Drivers Per Package |
1 |
| Receivers Per Package |
1 |
| Supply Voltage(s)(V) |
5 |
| ESD(kV) |
12 |
| Temp Range(C) |
-40 to 125, -55 to 125 |
| Signaling Rate(Mbps) |
30 |
| ICC(Max)(mA) |
15 |
| Fail Safe |
Open |
| Isolated |
No |
| # of TX/RX |
1 TX / 1 RX |
| Common Mode Range |
-7 to 12 |
| Number of Nodes |
32 |
| Duplex |
Half |
| Footprint |
SN75176 |
| Comments |
Upgrade to ALS176A, Lower Power, improved ESD, Controlled Fab & A/T |
| Pin/Package |
8SOIC |
| Rating |
HiRel Enhanced Product |
| Fault Protection(V) |
-10 to 15 |
SN65LBC176A-EP 特性
- Controlled Baseline
- One Assembly/Test Site, One Fabrication Site
- Extended Temperature Performance of –40°C to 125°C
- Enhanced Diminishing Manufacturing Sources (DMS) Support
- Enhanced Product Change Notification
- Qualification Pedigree
- High-Speed Low-Power LinBiCMOS™ Circuitry Designed for Signaling Rates
Up to 30 Mbps
- Bus-Pin ESD Protection Exceeds 12-kV HBM
- Compatible With ANSI Standard TIA/EIA-485-A and ISO 8482:1987(E)
- Low Skew
- Designed for Multipoint Transmission on Long Bus Lines in Noisy Environments
- Low Disabled Supply Current Requirements . . . 700 µA Maximum
- Common Mode Voltage Range of –7 V to 12 V
- Thermal-Shutdown Protection
- Driver Positive and Negative Current Limiting
- Open-Circuit Fail-Safe Receiver Design
- Receiver Input Sensitivity ...±200 mV Max
- Receiver Input Hysteresis . . . 50 mV Typ
- Glitch-Free Power-Up and Power-Down Protection
SN65LBC176A-EP 芯片订购指南
| 器件 |
状态 |
温度 |
价格 |
封装 | 引脚 |
封装数量 | 封装载体 |
丝印标记 |
| SN65LBC176AMDREP |
ACTIVE |
-55 to 125 |
3.85 | 100u |
SOIC (D) | 8 |
2500 | LARGE T&R |
|
| SN65LBC176AQDREP |
ACTIVE |
-40 to 125 |
3.85 | 100u |
SOIC (D) | 8 |
2500 | LARGE T&R |
|
| V62/03671-01XE |
ACTIVE |
-40 to 125 |
3.85 | 100u |
SOIC (D) | 8 |
2500 | LARGE T&R |
|
| V62/03671-02XE |
ACTIVE |
-55 to 125 |
3.85 | 100u |
SOIC (D) | 8 |
2500 | LARGE T&R |
|
SN65LBC176A-EP 质量与无铅数据
| 器件 |
环保计划* |
铅/焊球涂层 |
MSL 等级/回流焊峰 |
环保信息与无铅 (Pb-free) |
DPPM / MTBF / FIT 率 |
| SN65LBC176AMDREP |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-1-260C-UNLIM |
SN65LBC176AMDREP |
SN65LBC176AMDREP |
| SN65LBC176AQDREP |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-1-260C-UNLIM |
SN65LBC176AQDREP |
SN65LBC176AQDREP |
| V62/03671-01XE |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-1-260C-UNLIM |
V62/03671-01XE |
V62/03671-01XE |
| V62/03671-02XE |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-1-260C-UNLIM |
V62/03671-02XE |
V62/03671-02XE |
SN65LBC176A-EP 应用技术支持与电子电路设计开发资源下载
- SN65LBC176A-EP 数据资料 dataSheet 下载.PDF
- TI 德州仪器RS-485选型与价格 . xls
- 所选封装材料的热学和电学性质 (PDF 645 KB)
- 使用数字隔离器设计隔离式 I2C 总线接口 (zhct119.PDF, 339 KB)
- 1Q 2011 Issue Analog Applications Journal (slyt399.PDF, 964 KB)
- 接口选择指南 (Rev. D) (PDF 2994 KB)
- Signaling Rate vs. Distance for Differential Buffers (PDF 420 KB)
- Q1 2009 Issue Analog Applications Journal (slyt319.PDF, 1.39 MB)
- Isolated RS-485 Reference Design (PDF 80 KB)
- 无铅组件涂层的保存期评估 (PDF 1305 KB)
- Analog Signal Chain Guide (8.62 MB)
- Industrial Interface IC Solutions (101 KB)
SN65LBC176A-EP 工具和软件
