SN75172 四路差动线路驱动器
The SN75172 is a monolithic quadruple differential line driver with 3-state outputs. It is designed to meet the requirements of ANSI Standards EIA/TIA-422-B and RS-485 and ITU Recommendation V.11. The device is optimized for balanced multipoint bus transmission at rates of up to 4 megabaud. Each driver features wide positive and negative common-mode output voltage ranges, making it suitable for party-line applications in noisy environments.
The SN75172 provides positive- and negative-current limiting and thermal shutdown for protection from line fault conditions on the transmission bus line. Shutdown occurs at a junction temperature of approximately 150°C. This device offers optimum performance when used with the SN75173 or SN75175 quadruple differential line receivers
|
SN75172 |
| Drivers Per Package |
4 |
| Supply Voltage(s)(V) |
5 |
| ESD(kV) |
2 |
| Temp Range(C) |
0 to 70 |
| Signaling Rate(Mbps) |
4 |
| ICC(Max)(mA) |
60 |
| Isolated |
No |
| # of TX/RX |
4 TX / 0 RX |
| Common Mode Range |
-7 to 12 |
| Number of Nodes |
32 |
| Duplex |
N/A |
| Footprint |
AM26LS31 |
| Comments |
Industry Standard - Quad Drivers |
| Pin/Package |
16PDIP, 20SOIC |
| Rating |
Catalog |
| Fault Protection(V) |
-10 to 15 |
SN75172 特性
- Meets or Exceeds the Requirements of ANSI Standards EIA/TIA-422-B and RS-485 and ITU Recommendation V.11
- Designed for Multipoint Transmission on Long Bus Lines in Noisy Environments
- 3-State Outputs
- Common-Mode Output Voltage Range of
-7 V to 12 V
- Active-High and Active-Low Enables
- Thermal Shutdown Protection
- Positive- and Negative-Current Limiting
- Operates From Single 5-V Supply
- Logically Interchangeable With AM26LS31
SN75172 芯片订购指南
| 器件 |
状态 |
温度 |
价格 |
封装 | 引脚 |
封装数量 | 封装载体 |
丝印标记 |
| SN75172DW |
ACTIVE |
0 to 70 |
1.75 | 1ku |
SOIC (DW) | 20 |
25 | TUBE |
|
| SN75172DWE4 |
ACTIVE |
0 to 70 |
1.75 | 1ku |
SOIC (DW) | 20 |
25 | TUBE |
|
| SN75172DWG4 |
ACTIVE |
0 to 70 |
1.75 | 1ku |
SOIC (DW) | 20 |
25 | TUBE |
|
| SN75172DWR |
ACTIVE |
0 to 70 |
1.45 | 1ku |
SOIC (DW) | 20 |
2000 | LARGE T&R |
|
| SN75172DWRE4 |
ACTIVE |
0 to 70 |
1.45 | 1ku |
SOIC (DW) | 20 |
2000 | LARGE T&R |
|
| SN75172DWRG4 |
ACTIVE |
0 to 70 |
1.45 | 1ku |
SOIC (DW) | 20 |
2000 | LARGE T&R |
|
| SN75172N |
ACTIVE |
0 to 70 |
1.60 | 1ku |
PDIP (N) | 16 |
25 | TUBE |
|
| SN75172NE4 |
ACTIVE |
0 to 70 |
1.60 | 1ku |
PDIP (N) | 16 |
25 | TUBE |
|
SN75172 质量与无铅数据
| 器件 |
环保计划* |
铅/焊球涂层 |
MSL 等级/回流焊峰 |
环保信息与无铅 (Pb-free) |
DPPM / MTBF / FIT 率 |
| SN75172DW |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-1-260C-UNLIM |
SN75172DW |
SN75172DW |
| SN75172DWE4 |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-1-260C-UNLIM |
SN75172DWE4 |
SN75172DWE4 |
| SN75172DWG4 |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-1-260C-UNLIM |
SN75172DWG4 |
SN75172DWG4 |
| SN75172DWR |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-1-260C-UNLIM |
SN75172DWR |
SN75172DWR |
| SN75172DWRE4 |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-1-260C-UNLIM |
SN75172DWRE4 |
SN75172DWRE4 |
| SN75172DWRG4 |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-1-260C-UNLIM |
SN75172DWRG4 |
SN75172DWRG4 |
| SN75172N |
Pb-Free (RoHS) |
CU NIPD |
N/A for Pkg Type |
SN75172N |
SN75172N |
| SN75172NE4 |
Pb-Free (RoHS) |
CU NIPD |
N/A for Pkg Type |
SN75172NE4 |
SN75172NE4 |
SN75172 应用技术支持与电子电路设计开发资源下载
- SN75172 数据资料 dataSheet 下载.PDF
- TI 德州仪器RS-422选型与价格 . xls
- 所选封装材料的热学和电学性质 (PDF 645 KB)
- 使用数字隔离器设计隔离式 I2C 总线接口 (zhct119.PDF, 339 KB)
- 1Q 2011 Issue Analog Applications Journal (slyt399.PDF, 964 KB)
- 接口选择指南 (Rev. D) (PDF 2994 KB)
- Signaling Rate vs. Distance for Differential Buffers (PDF 420 KB)
- Q1 2009 Issue Analog Applications Journal (slyt319.PDF, 1.39 MB)
- Isolated RS-485 Reference Design (PDF 80 KB)
- 无铅组件涂层的保存期评估 (PDF 1305 KB)
- Analog Signal Chain Guide (8.62 MB)
- Industrial Interface IC Solutions (101 KB)
SN75172 工具和软件
