SN75ALS176A 差动总线收发器

The SN65ALS176 and SN75ALS176 series differential bus transceivers are designed for bidirectional data communication on multipoint bus transmission lines. They are designed for balanced transmission lines and meet TIA/EIA-422-B, TIA/EIA-485-A, and ITU Recommendations V.11 and X.27.

The SN65ALS176 and SN75ALS176 series combine a 3-state, differential line driver and a differential input line receiver, both of which operate from a single 5-V power supply. The driver and receiver have active-high and active-low enables, respectively, that can be connected together externally to function as a direction control. The driver differential outputs and the receiver differential inputs are connected internally to form a differential input/output (I/O) bus port that is designed to offer minimum loading to the bus when the driver is disabled or VCC = 0

SN75ALS176A
Drivers Per Package 1  
Receivers Per Package 1  
Supply Voltage(s)(V) 5  
ESD(kV) 2  
Temp Range(C) 0 to 70  
Signaling Rate(Mbps) 35  
ICC(Max)(mA) 30  
Fail Safe Open  
Isolated No  
# of TX/RX 1 TX / 1 RX  
Common Mode Range -7 to 12  
Number of Nodes 32  
Duplex Half  
Footprint SN75176  
Comments Upgrade to SN75176A/B: Lower Power, Skew: 7.5 ns  
Pin/Package 8PDIP, 8SOIC  
Rating Catalog  
Fault Protection(V) -10 to 15  
SN75ALS176A 特性
SN75ALS176A 芯片订购指南
器件 状态 温度 价格 封装 | 引脚 封装数量 | 封装载体 丝印标记
SN75ALS176AD ACTIVE 0 to 70 1.35 | 1ku SOIC (D) | 8 75 | TUBE  
SN75ALS176ADE4 ACTIVE 0 to 70 1.35 | 1ku SOIC (D) | 8 75 | TUBE  
SN75ALS176ADG4 ACTIVE 0 to 70 1.35 | 1ku SOIC (D) | 8 75 | TUBE  
SN75ALS176ADR ACTIVE 0 to 70 1.15 | 1ku SOIC (D) | 8 2500 | LARGE T&R  
SN75ALS176ADRE4 ACTIVE 0 to 70 1.15 | 1ku SOIC (D) | 8 2500 | LARGE T&R  
SN75ALS176ADRG4 ACTIVE 0 to 70 1.15 | 1ku SOIC (D) | 8 2500 | LARGE T&R  
SN75ALS176AP ACTIVE 0 to 70 1.25 | 1ku PDIP (P) | 8 50 | TUBE  
SN75ALS176APE4 ACTIVE 0 to 70 1.25 | 1ku PDIP (P) | 8 50 | TUBE  
SN75ALS176A 质量与无铅数据
器件 环保计划* 铅/焊球涂层 MSL 等级/回流焊峰 环保信息与无铅 (Pb-free) DPPM / MTBF / FIT 率
SN75ALS176AD Green (RoHS & no Sb/Br)  CU NIPDAU  Level-1-260C-UNLIM SN75ALS176AD SN75ALS176AD
SN75ALS176ADE4 Green (RoHS & no Sb/Br)  CU NIPDAU  Level-1-260C-UNLIM SN75ALS176ADE4 SN75ALS176ADE4
SN75ALS176ADG4 Green (RoHS & no Sb/Br)  CU NIPDAU  Level-1-260C-UNLIM SN75ALS176ADG4 SN75ALS176ADG4
SN75ALS176ADR Green (RoHS & no Sb/Br)  CU NIPDAU  Level-1-260C-UNLIM SN75ALS176ADR SN75ALS176ADR
SN75ALS176ADRE4 Green (RoHS & no Sb/Br)  CU NIPDAU  Level-1-260C-UNLIM SN75ALS176ADRE4 SN75ALS176ADRE4
SN75ALS176ADRG4 Green (RoHS & no Sb/Br)  CU NIPDAU  Level-1-260C-UNLIM SN75ALS176ADRG4 SN75ALS176ADRG4
SN75ALS176AP Pb-Free (RoHS)  CU NIPD  N/A for Pkg Type SN75ALS176AP SN75ALS176AP
SN75ALS176APE4 Pb-Free (RoHS)  CU NIPD  N/A for Pkg Type SN75ALS176APE4 SN75ALS176APE4
SN75ALS176A 应用技术支持与电子电路设计开发资源下载
  1. SN75ALS176A 数据资料 dataSheet 下载.PDF
  2. TI 德州仪器RS-422选型与价格 . xls
  3. 所选封装材料的热学和电学性质 (PDF 645 KB)
  4. 使用数字隔离器设计隔离式 I2C 总线接口 (zhct119.PDF, 339 KB)
  5. 1Q 2011 Issue Analog Applications Journal (slyt399.PDF, 964 KB)
  6. 接口选择指南 (Rev. D) (PDF 2994 KB)
  7. Signaling Rate vs. Distance for Differential Buffers (PDF 420 KB)
  8. Q1 2009 Issue Analog Applications Journal (slyt319.PDF, 1.39 MB)
  9. Isolated RS-485 Reference Design (PDF 80 KB)
  10. 无铅组件涂层的保存期评估 (PDF 1305 KB)
  11. Analog Signal Chain Guide (8.62 MB)
  12. Industrial Interface IC Solutions (101 KB)
SN75ALS176A 工具和软件
培训内容 型号 软件/工具类型
SN75ALS176A 评估模块 SN75ALS176AEVM 开发电路板/EVM