SN75LBC173A 四路低功耗差动线路驱动器
The SN65LBC173A and SN75LBC173A are quadruple differential line receivers with 3-state outputs, designed for TIA/EIA-485 (RS-485), TIA/EIA-422 (RS-422), and ISO 8482 (Euro RS-485) applications.
These devices are optimized for balanced multipoint bus communication at data rates up to and exceeding 50 million bits per second. The transmission media may be twisted-pair cables, printed-circuit board traces, or backplanes. The ultimate rate and distance of data transfer is dependent upon the attenuation characteristics of the media and the noise coupling to the environment.
Each receiver operates over a wide range of positive and negative common-mode input voltages, and features ESD protection to 6 kV, making it suitable for high-speed multipoint data transmission applications in harsh environments
|
SN75LBC173A |
| Drivers Per Package |
|
| Receivers Per Package |
4 |
| Supply Voltage(s)(V) |
5 |
| ESD(kV) |
6 |
| Temp Range(C) |
0 to 70 |
| Signaling Rate(Mbps) |
50 |
| ICC(Max)(mA) |
20 |
| Fail Safe |
Open, Short |
| Isolated |
No |
| # of TX/RX |
0 TX / 4 RX |
| Common Mode Range |
-7 to 12 |
| Number of Nodes |
32 |
| Duplex |
N/A |
| Footprint |
AM26LS32 |
| Comments |
Upgrade to LBC174: Higher Signaling Rate, improved ESD |
| Pin/Package |
16PDIP, 16SOIC |
| Rating |
Catalog |
| Fault Protection(V) |
-10 to 15 |
SN75LBC173A 特性
- Designed for TIA/EIA-485, TIA/EIA-422, and ISO 8482 Applications
- Signaling Rate
Exceeding 50 Mbps
- Fail-Safe in Bus Short-Circuit, Open-Circuit, and Idle-Bus Conditions
- ESD Protection on Bus Inputs Exceeds 6kV
- Common-Mode Bus Input Range -7 V to 12 V
- Propagation Delay Times <16 ns
- Low Standby Power Consumption <20 µA
- Pin-Compatible Upgrade for AM26LS32, DS96F173, LTC488, and SN75173
SN75LBC173A 芯片订购指南
| 器件 |
状态 |
温度 |
价格 |
封装 | 引脚 |
封装数量 | 封装载体 |
丝印标记 |
| SN75LBC173AD |
ACTIVE |
0 to 70 |
2.15 | 1ku |
SOIC (DW) | 16 |
40 | TUBE |
|
| SN75LBC173ADG4 |
ACTIVE |
0 to 70 |
2.15 | 1ku |
SOIC (DW) | 16 |
40 | TUBE |
|
| SN75LBC173ADR |
ACTIVE |
0 to 70 |
1.80 | 1ku |
SOIC (DW) | 16 |
2500 | LARGE T&R |
|
| SN75LBC173ADRG4 |
ACTIVE |
0 to 70 |
1.80 | 1ku |
SOIC (DW) | 16 |
2500 | LARGE T&R |
|
| SN75LBC173AN |
ACTIVE |
0 to 70 |
2.15 | 1ku |
PDIP (N) | 16 |
25 | TUBE |
|
| SN75LBC173ANE4 |
ACTIVE |
0 to 70 |
2.15 | 1ku |
PDIP (N) | 16 |
25 | TUBE |
|
SN75LBC173A 质量与无铅数据
| 器件 |
环保计划* |
铅/焊球涂层 |
MSL 等级/回流焊峰 |
环保信息与无铅 (Pb-free) |
DPPM / MTBF / FIT 率 |
| SN75LBC173AD |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-1-260C-UNLIM |
SN75LBC173AD |
SN75LBC173AD |
| SN75LBC173ADG4 |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-1-260C-UNLIM |
SN75LBC173ADG4 |
SN75LBC173ADG4 |
| SN75LBC173ADR |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-1-260C-UNLIM |
SN75LBC173ADR |
SN75LBC173ADR |
| SN75LBC173ADRG4 |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-1-260C-UNLIM |
SN75LBC173ADRG4 |
SN75LBC173ADRG4 |
| SN75LBC173AN |
Pb-Free (RoHS) |
CU NIPD |
N/A for Pkg Type |
SN75LBC173AN |
SN75LBC173AN |
| SN75LBC173ANE4 |
Pb-Free (RoHS) |
CU NIPD |
N/A for Pkg Type |
SN75LBC173ANE4 |
SN75LBC173ANE4 |
SN75LBC173A 应用技术支持与电子电路设计开发资源下载
- SN75LBC173A 数据资料 dataSheet 下载.PDF
- TI 德州仪器RS-485选型与价格 . xls
- 所选封装材料的热学和电学性质 (PDF 645 KB)
- 使用数字隔离器设计隔离式 I2C 总线接口 (zhct119.PDF, 339 KB)
- 1Q 2011 Issue Analog Applications Journal (slyt399.PDF, 964 KB)
- 接口选择指南 (Rev. D) (PDF 2994 KB)
- Signaling Rate vs. Distance for Differential Buffers (PDF 420 KB)
- Q1 2009 Issue Analog Applications Journal (slyt319.PDF, 1.39 MB)
- Isolated RS-485 Reference Design (PDF 80 KB)
- 无铅组件涂层的保存期评估 (PDF 1305 KB)
- Analog Signal Chain Guide (8.62 MB)
- Industrial Interface IC Solutions (101 KB)
SN75LBC173A 工具和软件
